Vendita di attrezzature per l'apicoltura, arnie, smelatori e maturatori, miele e polline della Valtellina

Apistan is an acaricide used to kill Varroa. The active ingredient is a synthetic pyrethroid tau-fluvalinate (or sometimes ?-fluvalinate). Synthetic in this case means that it is not a natural compound, but is produced using a chemical process.

Apistan is an acaricide used to kill Varroa. The active ingredient is a synthetic pyrethroid tau-fluvalinate (or sometimes ?-fluvalinate). Synthetic in this case means that it is not a natural compound, but is produced using a chemical process.

APIVAR- Beehive strips for bees , 10-pack. product features in section (DOWNLOAD) How Apivar worksThe active ingredient amitraz has insecticidal and acaricidal activity by contact.It inhibits neuronal transmission causing neurotoxicity. The parasite becomes paralyzed and is eliminated naturally by gravity in the environment.Apivar is therefore indicated for the prevention and treatment of external parasite disorders due to Varroa jacobsoni or Varroa destructor.How to use ApivarUse 2 strips of Apivar per Beehive (10 frames). Separate the double stripand arrange each strip between two movable frames in the rearing chamberor between groups of bees, keeping a distance of two frames between one strip and the other. Suspend product treatment in the rearing chamber so that bees can move to both sides of the strip.

APIVAR- Beehive strips for bees , 10-pack. product features in section (DOWNLOAD) How Apivar worksThe active ingredient amitraz has insecticidal and acaricidal activity by contact.It inhibits neuronal transmission causing neurotoxicity. The parasite becomes paralyzed and is eliminated naturally by gravity in the environment.Apivar is therefore indicated for the prevention and treatment of external parasite disorders due to Varroa jacobsoni or Varroa destructor.How to use ApivarUse 2 strips of Apivar per Beehive (10 frames). Separate the double stripand arrange each strip between two movable frames in the rearing chamberor between groups of bees, keeping a distance of two frames between one strip and the other. Suspend product treatment in the rearing chamber so that bees can move to both sides of the strip.

VETERINARY MEDICINAL NAME: APITRAZ 500 mg Beehive Strips for Bees / Amitraz INDICATION OF ACTIVE PRINCIPLE AND OTHER INGREDIENTS Each strip contains: Active ingredient: Amitraz 500 mg INDICATIONS: Treatment of external parasitosis caused by Varroa destructor sensitive to amitraz. SPECIES OF DESTINATION: Bees (Apis mellifera) POSOLOGY FOR EACH SPECIES, WAY AND METHOD OF SOMMINISTRATION USE IN THE BEehive Use 2 strips per Beehive, hang each strip between 2 combs of honey stocks. Place the 2 strips between 2 combs where bees show the most passing activity. Hang the strips in a way that allows bees free access to both sides while maintaining bee space. Beehive TYPES: Dadant-type Beehives, place one strip between the 3rd and 4th honeycomb and the other strip between the 7th and 8th honeycomb WARNINGS FOR CORRECT SUMMARY The strips should be removed after 6 weeks. Strips should not be cut. The product should be used when the amount of brood is low compared to maximum levels. In addition, the product should be applied when the bees are still active, that is, before the bees form the glomere; the exact time of administration may vary among different climate zones. Therefore, brood levels and climatic conditions should be considered before applying the product. HONEY WAITING TIME : 0 days . DO NOT USE during honey harvest. WARNING: THE SALE OF THIS MEDICATION 'ALLOWED ONLY IN ITALY. ORDERS FROM OTHER COUNTRIES WILL NOT BE PROCESSED. ATTENTION: LA VENTE DE CE MÉDICAMENT 'ADMIS SEULEMENT EN ITALIE. ORDRESD'AUTRES PAYS NE SERONT PAS TRAITÉES.

VETERINARY MEDICINAL NAME: APITRAZ 500 mg Beehive Strips for Bees / Amitraz INDICATION OF ACTIVE PRINCIPLE AND OTHER INGREDIENTS Each strip contains: Active ingredient: Amitraz 500 mg INDICATIONS: Treatment of external parasitosis caused by Varroa destructor sensitive to amitraz. SPECIES OF DESTINATION: Bees (Apis mellifera) POSOLOGY FOR EACH SPECIES, WAY AND METHOD OF SOMMINISTRATION USE IN THE BEehive Use 2 strips per Beehive, hang each strip between 2 combs of honey stocks. Place the 2 strips between 2 combs where bees show the most passing activity. Hang the strips in a way that allows bees free access to both sides while maintaining bee space. Beehive TYPES: Dadant-type Beehives, place one strip between the 3rd and 4th honeycomb and the other strip between the 7th and 8th honeycomb WARNINGS FOR CORRECT SUMMARY The strips should be removed after 6 weeks. Strips should not be cut. The product should be used when the amount of brood is low compared to maximum levels. In addition, the product should be applied when the bees are still active, that is, before the bees form the glomere; the exact time of administration may vary among different climate zones. Therefore, brood levels and climatic conditions should be considered before applying the product. HONEY WAITING TIME : 0 days . DO NOT USE during honey harvest. WARNING: THE SALE OF THIS MEDICATION 'ALLOWED ONLY IN ITALY. ORDERS FROM OTHER COUNTRIES WILL NOT BE PROCESSED. ATTENTION: LA VENTE DE CE MÉDICAMENT 'ADMIS SEULEMENT EN ITALIE. ORDRESD'AUTRES PAYS NE SERONT PAS TRAITÉES.

APIGUARD- treatment of varroasis of bees caused by Varroa destructor, 10-pack product features in the section (DOWNLOAD)

APIGUARD- treatment of varroasis of bees caused by Varroa destructor, 10-pack product features in the section (DOWNLOAD)

APIGUARD- treatment of varroasis of bees caused by Varroa destructor, 10-pack product features in the section (DOWNLOAD)

APIGUARD- treatment of varroasis of bees caused by Varroa destructor, 10-pack product features in the section (DOWNLOAD)

POSOLOGY AND SUMMMINISTRATION Beehive treatment: two applications of 50 g gel (equivalent to 12.5 g thymol/dose) per colony at 2-week intervals. Maximum of two treatments per year Method of administration Open the Beehive. Place the dosing stand (supplied) in the middle of the brood combs. The product should be well mixed before use for 10 seconds with a hive lever or similar instrument. Using the dosing syringe (supplied), transfer the first 50-gram dose of gel from the bucket to the dosing stand as follows: Remove the dosing syringe from its packaging. Push the syringe cone completely into the gel making sure that no air enters the syringe. Slowly pull back the plunger of the syringe to aspirate 52 ml (equivalent to 50 grams) of gel. Remove the syringe from the gel . Gently push back the syringe plunger to release the gel from the syringe gradually over the entire surface of the dispensing stand. Be careful, you need to be sure that there is a clearance of at least 0.5 cm between the top of the gel and the Beehive lid. Close the Beehive. After completing Beehive treatment, wash the syringe in warm water. Pull out the syringe plunger and wash the tool thoroughly until all traces of gel are removed . Allow to dry and store in closed container until next use. After two weeks, repeat the treatment by replacing the dispensing medium with a new one on which a second dose of 52 ml (equivalent to 50 grams) of gel should be applied following the procedure described above. Leave the product in the Beehives for another 2 weeks until it has completely disappeared from the dosing stand. Remove the product when mounting the Honey super to the hives. See figures below: The efficacy of the drug is maximized if the product is used in late summer after honey harvest (when the amount of brood is decreasing). However, in the case of severe infestation, the product can also be used in spring when temperatures are above 15°C. Efficacy may vary from hive to hive as a result of the mode of application. Therefore, the product should be used interspersed with other treatments as part of an integrated varroa control program, and the natural fall of mites should be regularly monitored. If further significant mite drop is observed during the following winter or spring, additional treatment in winter or spring is recommended. 4.10 Overdose (symptoms, emergency procedures, antidotes) if necessary *.

POSOLOGY AND SUMMMINISTRATION Beehive treatment: two applications of 50 g gel (equivalent to 12.5 g thymol/dose) per colony at 2-week intervals. Maximum of two treatments per year Method of administration Open the Beehive. Place the dosing stand (supplied) in the middle of the brood combs. The product should be well mixed before use for 10 seconds with a hive lever or similar instrument. Using the dosing syringe (supplied), transfer the first 50-gram dose of gel from the bucket to the dosing stand as follows: Remove the dosing syringe from its packaging. Push the syringe cone completely into the gel making sure that no air enters the syringe. Slowly pull back the plunger of the syringe to aspirate 52 ml (equivalent to 50 grams) of gel. Remove the syringe from the gel . Gently push back the syringe plunger to release the gel from the syringe gradually over the entire surface of the dispensing stand. Be careful, you need to be sure that there is a clearance of at least 0.5 cm between the top of the gel and the Beehive lid. Close the Beehive. After completing Beehive treatment, wash the syringe in warm water. Pull out the syringe plunger and wash the tool thoroughly until all traces of gel are removed . Allow to dry and store in closed container until next use. After two weeks, repeat the treatment by replacing the dispensing medium with a new one on which a second dose of 52 ml (equivalent to 50 grams) of gel should be applied following the procedure described above. Leave the product in the Beehives for another 2 weeks until it has completely disappeared from the dosing stand. Remove the product when mounting the Honey super to the hives. See figures below: The efficacy of the drug is maximized if the product is used in late summer after honey harvest (when the amount of brood is decreasing). However, in the case of severe infestation, the product can also be used in spring when temperatures are above 15°C. Efficacy may vary from hive to hive as a result of the mode of application. Therefore, the product should be used interspersed with other treatments as part of an integrated varroa control program, and the natural fall of mites should be regularly monitored. If further significant mite drop is observed during the following winter or spring, additional treatment in winter or spring is recommended. 4.10 Overdose (symptoms, emergency procedures, antidotes) if necessary *.

APILIFE VAR- a product against varroa whose main active substance is thymol , package containing No. 2 tablets. product characteristics in the section (DOWNLOAD)

APILIFE VAR- a product against varroa whose main active substance is thymol , package containing No. 2 tablets. product characteristics in the section (DOWNLOAD)

Guaranteed safety for consumers, bees, and Beehive products;Exact dosage for precise number of hives;Allowed in organic beekeeping;Easily soluble in sugar syrup at room temperature;Excellent efficacy (>96%) and tolerability;

Guaranteed safety for consumers, bees, and Beehive products;Exact dosage for precise number of hives;Allowed in organic beekeeping;Easily soluble in sugar syrup at room temperature;Excellent efficacy (>96%) and tolerability;

Guaranteed safety for consumers, bees, and Beehive products;Exact dosage for precise number of hives;Allowed in organic beekeeping;Easily soluble in sugar syrup at room temperature;Excellent efficacy (>96%) and tolerability.

Guaranteed safety for consumers, bees, and Beehive products;Exact dosage for precise number of hives;Allowed in organic beekeeping;Easily soluble in sugar syrup at room temperature;Excellent efficacy (>96%) and tolerability.

Guaranteed safety for consumers, bees, and Beehive products;Exact dosage for precise number of hives;Allowed in organic beekeeping;Easily soluble in sugar syrup at room temperature;Excellent efficacy (>96%) and tolerability.

Guaranteed safety for consumers, bees, and Beehive products;Exact dosage for precise number of hives;Allowed in organic beekeeping;Easily soluble in sugar syrup at room temperature;Excellent efficacy (>96%) and tolerability.

WHEN TO USE Spring, summer and winter in the absence of brood (induced or natural) HOW TO USE Drip administration

WHEN TO USE Spring, summer and winter in the absence of brood (induced or natural) HOW TO USE Drip administration

WHEN TO USE Spring, summer and winter in the absence of brood (induced or natural) HOW TO USE Drip administration

WHEN TO USE Spring, summer and winter in the absence of brood (induced or natural) HOW TO USE Drip administration

-

-

Dosa-Laif is the dispenser created to quickly and easily measure and administer solutions such as Api-Bioxal, ApiHerb, SuperBee, ApiGo and Micostop and will make you forget the classic syringe. - 100% MADE IN ITALY; - softer, wider bottle to ensure greater stability and easier pressure; - wider exit holes that allow dosing of even denser solutions such as ApiHerb and Superbee; - one-piece cap with spout.

Dosa-Laif is the dispenser created to quickly and easily measure and administer solutions such as Api-Bioxal, ApiHerb, SuperBee, ApiGo and Micostop and will make you forget the classic syringe. - 100% MADE IN ITALY; - softer, wider bottle to ensure greater stability and easier pressure; - wider exit holes that allow dosing of even denser solutions such as ApiHerb and Superbee; - one-piece cap with spout.

WHEN TO USE-During the broodless period-one treatment per Beehive or per generation of bees. Use in the absence of Honey super. Use with Beehives with vertical frames accessible from above. HOW TO USE -> SEE ATTACHMENT TO DOWNLOAD ADVANTAGES - Glycerol prolongs the shelf life of the oxalic acid solution, thus its distribution in the hive - Oxybee is the first oxalic acid product with glycerol and essential oils available in Italy - Average efficacy >98% - Product approved for organic beekeeping

WHEN TO USE-During the broodless period-one treatment per Beehive or per generation of bees. Use in the absence of Honey super. Use with Beehives with vertical frames accessible from above. HOW TO USE -> SEE ATTACHMENT TO DOWNLOAD ADVANTAGES - Glycerol prolongs the shelf life of the oxalic acid solution, thus its distribution in the hive - Oxybee is the first oxalic acid product with glycerol and essential oils available in Italy - Average efficacy >98% - Product approved for organic beekeeping

WINTER DRIPED: Dosage: drip with syringe 8-10 ml of warm solution per frame. Use 50-80 ml per colony Preparation: for a 275 g bottle add 275 g sugar and mix (1:1 solution) DRILLED OR SPRAYED SUMMER: Dosage: for swarms use 20-25 ml per kg of bee mass, for nuclei and colonies without brood spray 2-4 ml per side of frame. Preparation: for 275 g bottle add 250 ml of drinking water.Posology and route of administration The product should be used as follows : A) Application by drip: Preparation of ready-to-use 3.5% (m/V) oxalic acid dihydrate solution for drip: Pre-heat the container of oxalic acid dihydrate solution in a water bath (30-35 °C). Remove from the water bath and open the sealed container. Add the required amount of sugar (sucrose) of the type used for bee feeding: - 275 g sugar when using the 275 g bottle - 1 kg sugar when using the 1000 g bottle Close the container and shake vigorously until the sugar has completely dissolved. The solution is ready for use and should be applied lukewarm. Administration Fill a syringe (60 ml) or similar device through the wide opening of the container with the required amount of ready-to-use solution to treat one colony. The dose per frame is : 0.25 ml/dm2 for Western/Central Europe and 0.4 ml/dm2 for Southern Europe. For two-chamber Beehives, drip the lower nest first and then the upper nest. Mite drop will continue for 3 weeks The ready-to-use drip solution is sufficient to treat 6 to 15 colonies when using the 275 g bottle or 20 to 50 colonies when using the 1000 g bottle. The ready-to-use drip solution should be used immediately and cannot be stored after preparation. B) Application by spraying: Preparation of ready-to-use 3% (m/V) solution of oxalic acid dihydrate for spraying: Add drinking water to the solution: - 250 g (250 ml) of drinking water when using the 275 g bottle; - 900 g (900 ml) of drinking water when using the 1,000 g bottle, Close the container and shake. The solution is now ready for use. Administration Fill a hand sprayer or similar device with the required amount of ready-to-use solution to treat one colony. Spray 2-4 ml of solution on each side of the frame covered by the bees. If only half of the frame is covered with bees, the dosage should be reduced by 50%. The maximum dose is 80 ml. The total volume required varies according to the type of Beehive: - Colonies without brood, artificial colonies without brood or swarms newly placed in the Beehive should be treated with a dose of 0.3 ml/dm2 of frame completely covered with bees and for most hives. - Swarms, artificial swarms in glomeres should be sprayed with 20-25 ml of ready-to-use spray solution per kg of bees. For accurate spray dosing with your hand sprayer, spray 10 times into a measuring cup and calculate the volume for each pumping action. Calculate how many pumping actions are needed to treat one side of the frame. The frames should be sprayed at a 45° angle so as to minimize direct spraying into the cells. Mite fall will continue for 3 weeks. Treat swarm, artificial swarm or artificial broodless colony in spring/summer as a single treatment when most bees are inside the Beehive (in the evening). The ready-to-use spraying solution is sufficient to treat 5 to 10 colonies using the 275g bottle or 25 to 40 colonies using the large 1,000g bottle.

WINTER DRIPED: Dosage: drip with syringe 8-10 ml of warm solution per frame. Use 50-80 ml per colony Preparation: for a 275 g bottle add 275 g sugar and mix (1:1 solution) DRILLED OR SPRAYED SUMMER: Dosage: for swarms use 20-25 ml per kg of bee mass, for nuclei and colonies without brood spray 2-4 ml per side of frame. Preparation: for 275 g bottle add 250 ml of drinking water.Posology and route of administration The product should be used as follows : A) Application by drip: Preparation of ready-to-use 3.5% (m/V) oxalic acid dihydrate solution for drip: Pre-heat the container of oxalic acid dihydrate solution in a water bath (30-35 °C). Remove from the water bath and open the sealed container. Add the required amount of sugar (sucrose) of the type used for bee feeding: - 275 g sugar when using the 275 g bottle - 1 kg sugar when using the 1000 g bottle Close the container and shake vigorously until the sugar has completely dissolved. The solution is ready for use and should be applied lukewarm. Administration Fill a syringe (60 ml) or similar device through the wide opening of the container with the required amount of ready-to-use solution to treat one colony. The dose per frame is : 0.25 ml/dm2 for Western/Central Europe and 0.4 ml/dm2 for Southern Europe. For two-chamber Beehives, drip the lower nest first and then the upper nest. Mite drop will continue for 3 weeks The ready-to-use drip solution is sufficient to treat 6 to 15 colonies when using the 275 g bottle or 20 to 50 colonies when using the 1000 g bottle. The ready-to-use drip solution should be used immediately and cannot be stored after preparation. B) Application by spraying: Preparation of ready-to-use 3% (m/V) solution of oxalic acid dihydrate for spraying: Add drinking water to the solution: - 250 g (250 ml) of drinking water when using the 275 g bottle; - 900 g (900 ml) of drinking water when using the 1,000 g bottle, Close the container and shake. The solution is now ready for use. Administration Fill a hand sprayer or similar device with the required amount of ready-to-use solution to treat one colony. Spray 2-4 ml of solution on each side of the frame covered by the bees. If only half of the frame is covered with bees, the dosage should be reduced by 50%. The maximum dose is 80 ml. The total volume required varies according to the type of Beehive: - Colonies without brood, artificial colonies without brood or swarms newly placed in the Beehive should be treated with a dose of 0.3 ml/dm2 of frame completely covered with bees and for most hives. - Swarms, artificial swarms in glomeres should be sprayed with 20-25 ml of ready-to-use spray solution per kg of bees. For accurate spray dosing with your hand sprayer, spray 10 times into a measuring cup and calculate the volume for each pumping action. Calculate how many pumping actions are needed to treat one side of the frame. The frames should be sprayed at a 45° angle so as to minimize direct spraying into the cells. Mite fall will continue for 3 weeks. Treat swarm, artificial swarm or artificial broodless colony in spring/summer as a single treatment when most bees are inside the Beehive (in the evening). The ready-to-use spraying solution is sufficient to treat 5 to 10 colonies using the 275g bottle or 25 to 40 colonies using the large 1,000g bottle.

WINTER DRIP: Dosage: drip with syringe 8-10 ml of warm solution per frame. Use 50-80 ml per colony Preparation: per 1000 g bottle add 1 kg sugar and mix (1:1 solution) DRILLED OR SPRUZZLED SUMMER: Dosage: for swarms use 20-25 ml per kg mass of bees, for nuclei and colonies without brood spray 2-4 ml per side of frame. Preparation: for 1000 g bottle add 900 ml of drinking water. Posology and route of administration The product should be used as follows : A) Application by drip: Preparation of ready-to-use 3.5% (m/V) oxalic acid dihydrate solution for drip: Preheat the container of oxalic acid dihydrate solution in a water bath (30-35 °C). Remove from the water bath and open the sealed container. Add the required amount of sugar (sucrose) of the type used for bee feeding: - 275 g sugar when using the 275 g bottle - 1 kg sugar when using the 1000 g bottle Close the container and shake vigorously until the sugar has completely dissolved. The solution is ready for use and should be applied lukewarm. Administration Fill a syringe (60 ml) or similar device through the wide opening of the container with the required amount of ready-to-use solution to treat one colony. The dose per frame is : 0.25 ml/dm2 for Western/Central Europe and 0.4 ml/dm2 for Southern Europe. For two-chamber Beehives, drip the lower nest first and then the upper nest. Mite drop will continue for 3 weeks The ready-to-use drip solution is sufficient to treat 6 to 15 colonies when using the 275 g bottle or 20 to 50 colonies when using the 1000 g bottle. The ready-to-use drip solution should be used immediately and cannot be stored after preparation. B) Application by spraying: Preparation of ready-to-use 3% (m/V) solution of oxalic acid dihydrate for spraying: Add drinking water to the solution: - 250 g (250 ml) of drinking water when using the 275 g bottle; - 900 g (900 ml) of drinking water when using the 1,000 g bottle, Close the container and shake. The solution is now ready for use. Administration Fill a hand sprayer or similar device with the required amount of ready-to-use solution to treat one colony. Spray 2-4 ml of solution on each side of the frame covered by the bees. If only half of the frame is covered with bees, the dosage should be reduced by 50%. The maximum dose is 80 ml. The total volume required varies according to the type of Beehive: - Colonies without brood, artificial colonies without brood or swarms newly placed in the Beehive should be treated with a dose of 0.3 ml/dm2 of frame completely covered with bees and for most hives. - Swarms, artificial swarms in glomeres should be sprayed with 20-25 ml of ready-to-use spray solution per kg of bees. For accurate spray dosing with your hand sprayer, spray 10 times into a measuring cup and calculate the volume for each pumping action. Calculate how many pumping actions are needed to treat one side of the frame. The frames should be sprayed at a 45° angle so as to minimize direct spraying into the cells. Mite fall will continue for 3 weeks. Treat swarm, artificial swarm or artificial broodless colony in spring/summer as a single treatment when most bees are inside the Beehive (in the evening). The ready-to-use spraying solution is sufficient to treat 5 to 10 colonies using the 275g bottle or 25 to 40 colonies using the large 1,000g bottle.

WINTER DRIP: Dosage: drip with syringe 8-10 ml of warm solution per frame. Use 50-80 ml per colony Preparation: per 1000 g bottle add 1 kg sugar and mix (1:1 solution) DRILLED OR SPRUZZLED SUMMER: Dosage: for swarms use 20-25 ml per kg mass of bees, for nuclei and colonies without brood spray 2-4 ml per side of frame. Preparation: for 1000 g bottle add 900 ml of drinking water. Posology and route of administration The product should be used as follows : A) Application by drip: Preparation of ready-to-use 3.5% (m/V) oxalic acid dihydrate solution for drip: Preheat the container of oxalic acid dihydrate solution in a water bath (30-35 °C). Remove from the water bath and open the sealed container. Add the required amount of sugar (sucrose) of the type used for bee feeding: - 275 g sugar when using the 275 g bottle - 1 kg sugar when using the 1000 g bottle Close the container and shake vigorously until the sugar has completely dissolved. The solution is ready for use and should be applied lukewarm. Administration Fill a syringe (60 ml) or similar device through the wide opening of the container with the required amount of ready-to-use solution to treat one colony. The dose per frame is : 0.25 ml/dm2 for Western/Central Europe and 0.4 ml/dm2 for Southern Europe. For two-chamber Beehives, drip the lower nest first and then the upper nest. Mite drop will continue for 3 weeks The ready-to-use drip solution is sufficient to treat 6 to 15 colonies when using the 275 g bottle or 20 to 50 colonies when using the 1000 g bottle. The ready-to-use drip solution should be used immediately and cannot be stored after preparation. B) Application by spraying: Preparation of ready-to-use 3% (m/V) solution of oxalic acid dihydrate for spraying: Add drinking water to the solution: - 250 g (250 ml) of drinking water when using the 275 g bottle; - 900 g (900 ml) of drinking water when using the 1,000 g bottle, Close the container and shake. The solution is now ready for use. Administration Fill a hand sprayer or similar device with the required amount of ready-to-use solution to treat one colony. Spray 2-4 ml of solution on each side of the frame covered by the bees. If only half of the frame is covered with bees, the dosage should be reduced by 50%. The maximum dose is 80 ml. The total volume required varies according to the type of Beehive: - Colonies without brood, artificial colonies without brood or swarms newly placed in the Beehive should be treated with a dose of 0.3 ml/dm2 of frame completely covered with bees and for most hives. - Swarms, artificial swarms in glomeres should be sprayed with 20-25 ml of ready-to-use spray solution per kg of bees. For accurate spray dosing with your hand sprayer, spray 10 times into a measuring cup and calculate the volume for each pumping action. Calculate how many pumping actions are needed to treat one side of the frame. The frames should be sprayed at a 45° angle so as to minimize direct spraying into the cells. Mite fall will continue for 3 weeks. Treat swarm, artificial swarm or artificial broodless colony in spring/summer as a single treatment when most bees are inside the Beehive (in the evening). The ready-to-use spraying solution is sufficient to treat 5 to 10 colonies using the 275g bottle or 25 to 40 colonies using the large 1,000g bottle.

-

-

Packages : - Box 10 pouches (20 strips for 10 bee families) - Box 30 pouches (60 strips for 30 bee families) Dosage : No. 1 pouch per bee family (i.e., 2 strips per Beehive) Easy to apply, no evaporator required - 2-year shelf life when unopened - 7-day flash treatment repeatable if necessary after 30 days - Easy to store at room temperature

Packages : - Box 10 pouches (20 strips for 10 bee families) - Box 30 pouches (60 strips for 30 bee families) Dosage : No. 1 pouch per bee family (i.e., 2 strips per Beehive) Easy to apply, no evaporator required - 2-year shelf life when unopened - 7-day flash treatment repeatable if necessary after 30 days - Easy to store at room temperature

The unique feature of Apifor60 is the constant and continuous release of reduced doses of formic acid over an extended period of time through the use of suitable evaporators

The unique feature of Apifor60 is the constant and continuous release of reduced doses of formic acid over an extended period of time through the use of suitable evaporators

The unique feature of Apifor60 is the constant and continuous release of reduced doses of formic acid over an extended period of time through the use of suitable evaporators

The unique feature of Apifor60 is the constant and continuous release of reduced doses of formic acid over an extended period of time through the use of suitable evaporators

The cap is totally resistant to the action of formic acid and features an anti-drip system with patented technology that ensures controlled liquid flow.

The cap is totally resistant to the action of formic acid and features an anti-drip system with patented technology that ensures controlled liquid flow.

APIVAR- Beehive strips for bees , 10-pack. product features in section (DOWNLOAD) How Apivar worksThe active ingredient amitraz has insecticidal and acaricidal activity by contact.It inhibits neuronal transmission causing neurotoxicity. The parasite becomes paralyzed and is eliminated naturally by gravity in the environment.Apivar is therefore indicated for the prevention and treatment of external parasite disorders due to Varroa jacobsoni or Varroa destructor.How to use ApivarUse 2 strips of Apivar per Beehive (10 frames). Separate the double stripand arrange each strip between two movable frames in the rearing chamberor between groups of bees, keeping a distance of two frames between one strip and the other. Suspend product treatment in the rearing chamber so that bees can move to both sides of the strip.

APIVAR- Beehive strips for bees , 10-pack. product features in section (DOWNLOAD) How Apivar worksThe active ingredient amitraz has insecticidal and acaricidal activity by contact.It inhibits neuronal transmission causing neurotoxicity. The parasite becomes paralyzed and is eliminated naturally by gravity in the environment.Apivar is therefore indicated for the prevention and treatment of external parasite disorders due to Varroa jacobsoni or Varroa destructor.How to use ApivarUse 2 strips of Apivar per Beehive (10 frames). Separate the double stripand arrange each strip between two movable frames in the rearing chamberor between groups of bees, keeping a distance of two frames between one strip and the other. Suspend product treatment in the rearing chamber so that bees can move to both sides of the strip.

-

-

-

-

-

-

-

-

Information and useAvailable in 120 ml. packages. Dilution: B403 is used at 10 percent Dose for 1 Honey super frames: 20 ml. of the already diluted solution.Dose for 1 nest frames: 40 ml.120ml package treats 60 Honey super frames or 60 nest frames.B403, also known as Certan, is a biological product for the prevention of wax moths on stored frames.B403 uses Bacillus thuringiensis (Bt), a naturally occurring bacterium that kills wax moths at the larval stage.This bacterium produces protein crystals that, when ingested by the moths, break down their intestinal walls, causing their death within 24 hours of application.When to use B 403 ?At the end of the harvest, after the bees have cleaned the Honey super and before storing them.The protection will last until the Honey super is laid the following year.For storing nest combs in all possible situations. How to prepare B 403 ?B 403 CERTAN consists of Bacillus thuringiensis spores and should be diluted 10% in water. Shake the bottle of B 403 vigorously before mixing.Once diluted, B 403 should be used within 24 hours. It is therefore advisable to prepare only the necessary amount according to the number of frames to be treated.

Information and useAvailable in 120 ml. packages. Dilution: B403 is used at 10 percent Dose for 1 Honey super frames: 20 ml. of the already diluted solution.Dose for 1 nest frames: 40 ml.120ml package treats 60 Honey super frames or 60 nest frames.B403, also known as Certan, is a biological product for the prevention of wax moths on stored frames.B403 uses Bacillus thuringiensis (Bt), a naturally occurring bacterium that kills wax moths at the larval stage.This bacterium produces protein crystals that, when ingested by the moths, break down their intestinal walls, causing their death within 24 hours of application.When to use B 403 ?At the end of the harvest, after the bees have cleaned the Honey super and before storing them.The protection will last until the Honey super is laid the following year.For storing nest combs in all possible situations. How to prepare B 403 ?B 403 CERTAN consists of Bacillus thuringiensis spores and should be diluted 10% in water. Shake the bottle of B 403 vigorously before mixing.Once diluted, B 403 should be used within 24 hours. It is therefore advisable to prepare only the necessary amount according to the number of frames to be treated.