Sale of beekeeping equipment, beehives, honey extractors and ripeners, honey and pollen from Valtellina

Its unique shape allows it to be placed on all Beehives, Dadant Blatt, with or without a porch, and Langstroth polystyrene Beehives The pollen detachable grid with trapezoidal hole for bee passage has the ability to rotate to be held open or closed. The grids have 3 rows at the bottom, while laterally the bee passage goes up.A rib on both faces of the grid, at the holes and beyond, allows the bees to cling to then pass more easily.If at the placement of the trap on the Beehive, the pollen collection plate is left open, it makes it easier for the bees to recognize a new passage, reducing once it is lowered (closed) any entanglement.A very wide slit, before the pollen collection tray, allows the bees to remove dirt from the Beehive.Two side holes serve as drones passageA very wide roof provides good shelter for the trap from the weather. The tray, has excellent aeration and can hold up to 800 gr. of pollen. The professional pollen trap also comes with an anti Asian wasp net.The anti wasp net, lowered allows the bees to enter and exit with much more peace of mind since, the Asian wasp or velutin wasp cannot attack the beesThe trap is made entirely of 100% recyclable food grade plastic material, assembled without the use of screws, nails or toxic glues.

Its unique shape allows it to be placed on all Beehives, Dadant Blatt, with or without a porch, and Langstroth polystyrene Beehives The pollen detachable grid with trapezoidal hole for bee passage has the ability to rotate to be held open or closed. The grids have 3 rows at the bottom, while laterally the bee passage goes up.A rib on both faces of the grid, at the holes and beyond, allows the bees to cling to then pass more easily.If at the placement of the trap on the Beehive, the pollen collection plate is left open, it makes it easier for the bees to recognize a new passage, reducing once it is lowered (closed) any entanglement.A very wide slit, before the pollen collection tray, allows the bees to remove dirt from the Beehive.Two side holes serve as drones passageA very wide roof provides good shelter for the trap from the weather. The tray, has excellent aeration and can hold up to 800 gr. of pollen. The professional pollen trap also comes with an anti Asian wasp net.The anti wasp net, lowered allows the bees to enter and exit with much more peace of mind since, the Asian wasp or velutin wasp cannot attack the beesThe trap is made entirely of 100% recyclable food grade plastic material, assembled without the use of screws, nails or toxic glues.

-

-

With removable tray , possibility to keep bee passage open even with trap mounted , hole for drones passage

With removable tray , possibility to keep bee passage open even with trap mounted , hole for drones passage

Its special shape allows it to be placed on all Beehives, Dadant Blatt, with or without a porch, and Langstroth polystyrene Beehives The pollen detaching grid with round holes for bee passage has the ability to rotate to be held open or closed. The grids have 3 rows at the bottom, while laterally the bee passage goes up.A rib on both faces of the grid, at the holes and beyond, allows the bees to cling to then pass more easily.If at the placement of the trap on the Beehive, the pollen collector plate is left open, it makes it easier for the bees to recognize a new passage, reducing once it is lowered (closed) any engorgement.A very wide slit, before the pollen collector tray, allows the bees to remove dirt from the Beehive.Two side holes serve as drones passageA very wide roof provides good shelter for the trap from the weather. The tray, has excellent aeration and can hold up to 800 gr. of pollen. The professional pollen trap also comes with an anti Asian wasp net.The anti wasp net, lowered allows the bees to enter and exit with much more peace of mind since, the Asian wasp or velutin wasp cannot attack the beesThe trap is made entirely of 100% recyclable food grade plastic material, assembled without the use of screws, nails or toxic glues.

Its special shape allows it to be placed on all Beehives, Dadant Blatt, with or without a porch, and Langstroth polystyrene Beehives The pollen detaching grid with round holes for bee passage has the ability to rotate to be held open or closed. The grids have 3 rows at the bottom, while laterally the bee passage goes up.A rib on both faces of the grid, at the holes and beyond, allows the bees to cling to then pass more easily.If at the placement of the trap on the Beehive, the pollen collector plate is left open, it makes it easier for the bees to recognize a new passage, reducing once it is lowered (closed) any engorgement.A very wide slit, before the pollen collector tray, allows the bees to remove dirt from the Beehive.Two side holes serve as drones passageA very wide roof provides good shelter for the trap from the weather. The tray, has excellent aeration and can hold up to 800 gr. of pollen. The professional pollen trap also comes with an anti Asian wasp net.The anti wasp net, lowered allows the bees to enter and exit with much more peace of mind since, the Asian wasp or velutin wasp cannot attack the beesThe trap is made entirely of 100% recyclable food grade plastic material, assembled without the use of screws, nails or toxic glues.

-

-

-

-

-

-

With removable tray , possibility to keep bee passage open even with trap mounted , hole for drones passage

With removable tray , possibility to keep bee passage open even with trap mounted , hole for drones passage

Stainless steel two-shelf pollen dryer (including shelf) Dimensions : h 210mm -Ø300 mm. Basket: h 40 mm- 300 mm. Heating element: 475 W- motor for ventilation 12 W. Fuse: rapid type F4A-250. Thermostat (65° setting). Three-position switch. 230V- 50 Hz.

Stainless steel two-shelf pollen dryer (including shelf) Dimensions : h 210mm -Ø300 mm. Basket: h 40 mm- 300 mm. Heating element: 475 W- motor for ventilation 12 W. Fuse: rapid type F4A-250. Thermostat (65° setting). Three-position switch. 230V- 50 Hz.

-

-

-

-

With removable tray , possibility to keep bee passage open even with trap mounted , hole for drones passage

With removable tray , possibility to keep bee passage open even with trap mounted , hole for drones passage

-

-

-

-

With removable tray , possibility to keep bee passage open even with trap mounted , hole for drones passage

With removable tray , possibility to keep bee passage open even with trap mounted , hole for drones passage

-

-

-

-

-

-

-

-

-

-

Movable stainless steel shelves, forced ventilation, double heating element 230 V - 1000/2000 W adjustable thermostat , digital temperature gauge with LCD display; internal measurements 65x35xh 42 cm Insulated AISI 304 stainless steel structure Fully openable door with watertight gaskets- stainless steel lever closing hook- polycarbonate handle. Stainless steel hot air diffuser. Forced air recycling. Movable stainless steel shelves. Tangential fan, with aluminum fan.. Stainless steel heating element with dual power 1000/2000 W. Double switch to turn on heating element 1000/2000 W. Adjustable temperature with thermostat. Digital temperature gauge with LCD liquid crystal display LCD self-powered with battery included (one-year life). Maximum attainable temperature 75°. Loading capacity 2 25 kg buckets or 40 1 kg jars of honey or 4 pollen containers. Power supply 230V - 2000W

Movable stainless steel shelves, forced ventilation, double heating element 230 V - 1000/2000 W adjustable thermostat , digital temperature gauge with LCD display; internal measurements 65x35xh 42 cm Insulated AISI 304 stainless steel structure Fully openable door with watertight gaskets- stainless steel lever closing hook- polycarbonate handle. Stainless steel hot air diffuser. Forced air recycling. Movable stainless steel shelves. Tangential fan, with aluminum fan.. Stainless steel heating element with dual power 1000/2000 W. Double switch to turn on heating element 1000/2000 W. Adjustable temperature with thermostat. Digital temperature gauge with LCD liquid crystal display LCD self-powered with battery included (one-year life). Maximum attainable temperature 75°. Loading capacity 2 25 kg buckets or 40 1 kg jars of honey or 4 pollen containers. Power supply 230V - 2000W

-

-

-

-

Stainless steel container with high edges for pollen drying to be inserted into the electric fondimiele (QI F36)

Stainless steel container with high edges for pollen drying to be inserted into the electric fondimiele (QI F36)

Our professional pollen catcher trap has the advantage that it can be applied to virtually all existing Beehives, even those that have an entrance from above, and very easily. By attaching two different sheet metal canopies that protect it from the rain on the top, two different planes of support on the wall are created, and it can be applied to STANDARD Beehives with the porch (item LA 2405) and to KUBIK Beehives (item LA 2407). The trap rests on the step and is quickly attached to the front wall of the Beehive with two eye screws in prepared slots. The two clear plastic tubes inserted on either side of the trap are exactly level with the base net and facilitate cleaning by the bees. The "pollen peeler" grid is made of plastic, has only three horizontal rows of round holes and special longitudinal brackets at the base of the holes on which the bees rest before passing through the holes and losing the pollen pellets. The base net, on which the pollen falls before ending up in the box measures 90x360 mm and is made of AISI 304 stainless steel. On the top of the vertical wall supporting the grid are 6 transparent plastic cones with the tips pointing outward, which function as a one-way exit for drones and bees, but are not recognized by the bees as an entrance. The pollen collector drawer has a bottom made of AISI 304 stainless steel mesh, has a large size (330x90x110 mm) with a capacity of about 3300 cm³, and is pulled out by sliding it on two metal guides. (The average yield on a good day can exceed 500 grams.) The galvanized sheet metal canopy protrudes forward and protects the pollen contained in the drawer from rain.

Our professional pollen catcher trap has the advantage that it can be applied to virtually all existing Beehives, even those that have an entrance from above, and very easily. By attaching two different sheet metal canopies that protect it from the rain on the top, two different planes of support on the wall are created, and it can be applied to STANDARD Beehives with the porch (item LA 2405) and to KUBIK Beehives (item LA 2407). The trap rests on the step and is quickly attached to the front wall of the Beehive with two eye screws in prepared slots. The two clear plastic tubes inserted on either side of the trap are exactly level with the base net and facilitate cleaning by the bees. The "pollen peeler" grid is made of plastic, has only three horizontal rows of round holes and special longitudinal brackets at the base of the holes on which the bees rest before passing through the holes and losing the pollen pellets. The base net, on which the pollen falls before ending up in the box measures 90x360 mm and is made of AISI 304 stainless steel. On the top of the vertical wall supporting the grid are 6 transparent plastic cones with the tips pointing outward, which function as a one-way exit for drones and bees, but are not recognized by the bees as an entrance. The pollen collector drawer has a bottom made of AISI 304 stainless steel mesh, has a large size (330x90x110 mm) with a capacity of about 3300 cm³, and is pulled out by sliding it on two metal guides. (The average yield on a good day can exceed 500 grams.) The galvanized sheet metal canopy protrudes forward and protects the pollen contained in the drawer from rain.

- completely made of stainless steel, electrical panel with LCD digital thermometer, - thermostat with capillary probe 0-90°; maximum temperature 70° - heating element ignition separately from 1000W to 2000W (230V - 2000W) - non-slip feet and REMOVABLE closing bottom - external dimensions 84x93 h.126 cm

- completely made of stainless steel, electrical panel with LCD digital thermometer, - thermostat with capillary probe 0-90°; maximum temperature 70° - heating element ignition separately from 1000W to 2000W (230V - 2000W) - non-slip feet and REMOVABLE closing bottom - external dimensions 84x93 h.126 cm

-

-

Air heating is provided by 2 electric 500W heating elements with thermostat. Air is circulated by a fan. The lid can be removed when the machine is used as a dryer to allow moist air to be expelled

Air heating is provided by 2 electric 500W heating elements with thermostat. Air is circulated by a fan. The lid can be removed when the machine is used as a dryer to allow moist air to be expelled

Our professional pollen catcher trap has the advantage that it can be applied to virtually all existing Beehives, even those that have an entrance from above, and very easily. By attaching two different sheet metal canopies that protect it from the rain on the top, two different planes of support on the wall are created, and it can be applied to STANDARD Beehives with the porch (item LA 2405) and to KUBIK Beehives (code LA 2407). The trap rests on the step and is quickly attached to the front wall of the Beehive with two eye screws in prepared slots. The two clear plastic tubes inserted on either side of the trap are exactly level with the base net and facilitate cleaning by the bees. The "pollen peeler" grid is made of plastic, has only three horizontal rows of round holes and special longitudinal brackets at the base of the holes on which the bees rest before passing through the holes and losing the pollen pellets. The base net, on which the pollen falls before ending up in the tray measures 90x360 mm and is made of AISI 304 stainless steel. On the top of the vertical wall supporting the grid are 6 transparent plastic cones with the tips pointing outward, which function as a one-way exit for drones and bees, but are not recognized by the bees as an entrance. The pollen collector drawer has a bottom made of AISI 304 stainless steel mesh, has a large size (330x90x110 mm) with a capacity of about 3300 cm³, and is pulled out by sliding it on two metal guides. (The average yield on a good day can exceed 500 grams). The galvanized sheet metal canopy protrudes forward and protects the pollen contained in the drawer from rain.

Our professional pollen catcher trap has the advantage that it can be applied to virtually all existing Beehives, even those that have an entrance from above, and very easily. By attaching two different sheet metal canopies that protect it from the rain on the top, two different planes of support on the wall are created, and it can be applied to STANDARD Beehives with the porch (item LA 2405) and to KUBIK Beehives (code LA 2407). The trap rests on the step and is quickly attached to the front wall of the Beehive with two eye screws in prepared slots. The two clear plastic tubes inserted on either side of the trap are exactly level with the base net and facilitate cleaning by the bees. The "pollen peeler" grid is made of plastic, has only three horizontal rows of round holes and special longitudinal brackets at the base of the holes on which the bees rest before passing through the holes and losing the pollen pellets. The base net, on which the pollen falls before ending up in the tray measures 90x360 mm and is made of AISI 304 stainless steel. On the top of the vertical wall supporting the grid are 6 transparent plastic cones with the tips pointing outward, which function as a one-way exit for drones and bees, but are not recognized by the bees as an entrance. The pollen collector drawer has a bottom made of AISI 304 stainless steel mesh, has a large size (330x90x110 mm) with a capacity of about 3300 cm³, and is pulled out by sliding it on two metal guides. (The average yield on a good day can exceed 500 grams). The galvanized sheet metal canopy protrudes forward and protects the pollen contained in the drawer from rain.

Technical data Fabrication steel frame with polyurethane foam insulationMilk capacity 25 kg No. 12Capacity 300 kg drums No. 1Exterior dimensions 1000x1000x1100 mmInterior dimensions 700x720x1070 mmInstrumentation thermometer and thermostat readoutdigitalAbsorption 1000 WR Resistance 1x1000 WPWeight 54 kg

Technical data Fabrication steel frame with polyurethane foam insulationMilk capacity 25 kg No. 12Capacity 300 kg drums No. 1Exterior dimensions 1000x1000x1100 mmInterior dimensions 700x720x1070 mmInstrumentation thermometer and thermostat readoutdigitalAbsorption 1000 WR Resistance 1x1000 WPWeight 54 kg

METHOD OF USEThese pollen-collecting bottoms, having a tilting entrance, allow pollen collection by simply raising the movable part.1. You raise the movable part of the pollen-collecting bottom until the hive door is fully closed2. You lock the movable part, thus opening the entrance to the grid3. Bees are forced through the pollen-collecting grid, allowing collection through drawers constructed of wood and stainless mesh.

METHOD OF USEThese pollen-collecting bottoms, having a tilting entrance, allow pollen collection by simply raising the movable part.1. You raise the movable part of the pollen-collecting bottom until the hive door is fully closed2. You lock the movable part, thus opening the entrance to the grid3. Bees are forced through the pollen-collecting grid, allowing collection through drawers constructed of wood and stainless mesh.

.

.

-

-