€4,350.00Regular price-€450.00€4,800.00Price
Special Products
Featured Products
Candle and soap molds
Silicone rubber molds for candles and soaps
The ingredients that can be used are different, below is a possible recipe:Ingredients:Glycerin, beeswax, honey, water, essential oils to taste. Utensils:a saucepan, a container to be used only for soap, a spoon for turning, the silicone mold (molds) Procedure:Heat some water in a saucepan, divide the glycerin into small parts and melt it in a double boiler being careful not to let it bubble.Add 2 grams of wax and 5 grams of honey(optional). Stir well. Pour the contents into the cleaned and dried mold., being careful not to burn. Allow to cool in a cool, dry place for at least 1 hour. Tip:Dried flowers or other natural components can be used to embellish the soaps.The ingredients that can be used are different, below is a possible recipe:Ingredients: Glycerin, beeswax, honey, water, essential oils to taste. Utensils:a pot, a container to be used only for soap, a spoon for turning, the silicone mold (molds) Procedure:Heat some water in a pot, divide the glycerin into small parts and melt it in a water bath, being careful not to let it bubble. Add 2 grams of wax and 5 grams of honey(optional). Stir well. Pour the contents into the cleaned and dried mold., being careful not to burn. Allow to cool in a cool, dry place for at least 1 hour. Tip: Dried flowers or other natural components can be used to embellish the soaps.
The ingredients that can be used are different, below is a possible recipe:Ingredients:Glycerin, beeswax, honey, water, essential oils to taste. Utensils:a saucepan, a container to be used only for soap, a spoon for turning, the silicone mold (molds) Procedure:Heat some water in a saucepan, divide the glycerin into small parts and melt it in a double boiler being careful not to let it bubble.Add 2 grams of wax and 5 grams of honey(optional). Stir well. Pour the contents into the cleaned and dried mold., being careful not to burn. Allow to cool in a cool, dry place for at least 1 hour. Tip:Dried flowers or other natural components can be used to embellish the soaps.The ingredients that can be used are different, below is a possible recipe:Ingredients: Glycerin, beeswax, honey, water, essential oils to taste. Utensils:a pot, a container to be used only for soap, a spoon for turning, the silicone mold (molds) Procedure:Heat some water in a pot, divide the glycerin into small parts and melt it in a water bath, being careful not to let it bubble. Add 2 grams of wax and 5 grams of honey(optional). Stir well. Pour the contents into the cleaned and dried mold., being careful not to burn. Allow to cool in a cool, dry place for at least 1 hour. Tip: Dried flowers or other natural components can be used to embellish the soaps.
The molds are made of flexible silicone; they can be reused and are dishwasher safe.They are also suitable for candle making.They can be in contact with a variety of materials: beeswax, ceramic plaster, epoxy resin, soy wax, soap base, creative cement, kerosene wax, palm wax,... They are not suitable for food production.
The molds are made of flexible silicone; they can be reused and are dishwasher safe.They are also suitable for candle making.They can be in contact with a variety of materials: beeswax, ceramic plaster, epoxy resin, soy wax, soap base, creative cement, kerosene wax, palm wax,... They are not suitable for food production.
The molds are made of flexible silicone; they can be reused and are dishwasher safe.They are also suitable for candle making.They can be in contact with a variety of materials: beeswax, ceramic plaster, epoxy resin, soy wax, soap base, creative cement, kerosene wax, palm wax,... They are not suitable for food production.
€11.00Price
Shea butter glycerin for making soaps, 0.5 kg package (gross weight 0.525 kg)
€11.00Price
Shea butter glycerin for making soaps, 0.5 kg package (gross weight 0.525 kg)
Shea butter glycerin for making soaps, 0.5 kg package (gross weight 0.525 kg)
€11.00Price
€23.00Price
Flexible silicone soap moldMeasures: 22.4 cm x 16 cm x 2.5 cm - Weight: 0.24 kgThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
€23.00Price
Flexible silicone soap moldMeasures: 22.4 cm x 16 cm x 2.5 cm - Weight: 0.24 kgThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
Flexible silicone soap moldMeasures: 22.4 cm x 16 cm x 2.5 cm - Weight: 0.24 kgThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
€23.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€13.90Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€13.90Price
€13.90Price
Height: 50 mm Wax weight: 20 g Recommended wick: 2 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€13.90Price
Height: 50 mm Wax weight: 20 g Recommended wick: 2 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Height: 50 mm Wax weight: 20 g Recommended wick: 2 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€13.90Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€28.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€28.00Price
€28.00Price
Mold height: 75 mm - Wick: 3 mm - Weight: 70 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€28.00Price
Mold height: 75 mm - Wick: 3 mm - Weight: 70 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
Mold height: 75 mm - Wick: 3 mm - Weight: 70 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€28.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€20.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€20.80Price
€20.80Price
Mold height: 60 mm - Wick: 3 mm - Weight: 20 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€20.80Price
Mold height: 60 mm - Wick: 3 mm - Weight: 20 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
Mold height: 60 mm - Wick: 3 mm - Weight: 20 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€20.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€40.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€40.80Price
€40.80Price
Silicone candle mold with PRINTED CUBE 60 mmMold height: 60 mm - Wick: 2 mm - Weight: 140 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€40.80Price
Silicone candle mold with PRINTED CUBE 60 mmMold height: 60 mm - Wick: 2 mm - Weight: 140 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Silicone candle mold with PRINTED CUBE 60 mmMold height: 60 mm - Wick: 2 mm - Weight: 140 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€40.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€21.20Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€21.20Price
€21.20Price
Mold height: 80 mm - Diameter: 30 mm - Wick: 3 mm - Weight: 30 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€21.20Price
Mold height: 80 mm - Diameter: 30 mm - Wick: 3 mm - Weight: 30 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Mold height: 80 mm - Diameter: 30 mm - Wick: 3 mm - Weight: 30 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€21.20Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold with wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€36.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold with wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€36.00Price
€36.00Price
Silicone candle mold with STRAIGHT STEL 20 cmMold height: 200 mm - Diameter: 18 mm - Weight: 35 g - Wick: 3 mmSilicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€36.00Price
Silicone candle mold with STRAIGHT STEL 20 cmMold height: 200 mm - Diameter: 18 mm - Weight: 35 g - Wick: 3 mmSilicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Silicone candle mold with STRAIGHT STEL 20 cmMold height: 200 mm - Diameter: 18 mm - Weight: 35 g - Wick: 3 mmSilicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€36.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€46.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€46.80Price
€46.80Price
Mold height: 55 mm -Wick: 3 mm -Weight: 90 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€46.80Price
Mold height: 55 mm -Wick: 3 mm -Weight: 90 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
Mold height: 55 mm -Wick: 3 mm -Weight: 90 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€46.80Price
1) Preparation of the mold:It is recommended to spray the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge.(Candle wicks) 2) Fill the mold with wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C.>>> If you want to color the candle or add essences/essential oils, this is the time.(Candle accessories)Then slowly pour it into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
1) Preparation of the mold:It is recommended to spray the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge.(Candle wicks) 2) Fill the mold with wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C.>>> If you want to color the candle or add essences/essential oils, this is the time.(Candle accessories)Then slowly pour it into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy resin, soap base. They are not suitable for food production. To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness (wicks)- a rubber band- a toothpick- silicone (Spray) (HY SI01)
Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy resin, soap base. They are not suitable for food production. To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness (wicks)- a rubber band- a toothpick- silicone (Spray) (HY SI01)
Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy resin, soap base. They are not suitable for food production. To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness (wicks)- a rubber band- a toothpick- silicone (Spray) (HY SI01)
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€23.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€23.00Price
€23.00Price
Dimensions 22.5cm x 16cm. For use with special wicks art. HY T836 and HY T837 Silicone molds can be used for processing various raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€23.00Price
Dimensions 22.5cm x 16cm. For use with special wicks art. HY T836 and HY T837 Silicone molds can be used for processing various raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Dimensions 22.5cm x 16cm. For use with special wicks art. HY T836 and HY T837 Silicone molds can be used for processing various raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€23.00Price
€10.00Price
White glycerin for making soaps, 0.5 kg package (gross weight 0.525 kg)
€10.00Price
White glycerin for making soaps, 0.5 kg package (gross weight 0.525 kg)
White glycerin for making soaps, 0.5 kg package (gross weight 0.525 kg)
€10.00Price
€23.00Price
Flexible silicone soap moldWeight: 0.21 kgSize: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
€23.00Price
Flexible silicone soap moldWeight: 0.21 kgSize: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
Flexible silicone soap moldWeight: 0.21 kgSize: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
€23.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€20.50Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€20.50Price
€20.50Price
Silicone candle mold with bear with honey barrelHeight: 70 mm - Wax weight: 35 g - Recommended wick: 3 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€20.50Price
Silicone candle mold with bear with honey barrelHeight: 70 mm - Wax weight: 35 g - Recommended wick: 3 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Silicone candle mold with bear with honey barrelHeight: 70 mm - Wax weight: 35 g - Recommended wick: 3 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€20.50Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold with wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€39.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold with wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€39.00Price
€39.00Price
Silicone candle twist mold Height: 20 cm - Diameter: 1.8 cm - Wax weight: 35 g Recommended wick: 1.5 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€39.00Price
Silicone candle twist mold Height: 20 cm - Diameter: 1.8 cm - Wax weight: 35 g Recommended wick: 1.5 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Silicone candle twist mold Height: 20 cm - Diameter: 1.8 cm - Wax weight: 35 g Recommended wick: 1.5 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€39.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€37.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€37.80Price
€37.80Price
Height: 75 mm - Wax weight: 80 g - Recommended wick: 2 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€37.80Price
Height: 75 mm - Wax weight: 80 g - Recommended wick: 2 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Height: 75 mm - Wax weight: 80 g - Recommended wick: 2 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€37.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€23.60Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€23.60Price
€23.60Price
Height: 40 mm Wax weight: 30 g Recommended wick: 1.5 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€23.60Price
Height: 40 mm Wax weight: 30 g Recommended wick: 1.5 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Height: 40 mm Wax weight: 30 g Recommended wick: 1.5 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€23.60Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€32.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€32.80Price
€32.80Price
Height: 75 mm Wax weight: 25 g Recommended wick: 2 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€32.80Price
Height: 75 mm Wax weight: 25 g Recommended wick: 2 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Height: 75 mm Wax weight: 25 g Recommended wick: 2 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€32.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€44.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€44.80Price
€44.80Price
Silicone candle mold with STAR 7 cmMold height: 70 mm - Wick: 3 mm - Weight: 130 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€44.80Price
Silicone candle mold with STAR 7 cmMold height: 70 mm - Wick: 3 mm - Weight: 130 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Silicone candle mold with STAR 7 cmMold height: 70 mm - Wick: 3 mm - Weight: 130 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€44.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€4.50Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€4.50Price
€4.50Price
Bee diameter Ø40 mm - Mold height: 30 mm - Weight: 30 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€4.50Price
Bee diameter Ø40 mm - Mold height: 30 mm - Weight: 30 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Bee diameter Ø40 mm - Mold height: 30 mm - Weight: 30 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€4.50Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€23.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€23.00Price
€23.00Price
Dimensions 22.5cm x 16cm. For use with special wicks art. HY T836 and HY T837 Silicone molds can be used for processing various raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€23.00Price
Dimensions 22.5cm x 16cm. For use with special wicks art. HY T836 and HY T837 Silicone molds can be used for processing various raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Dimensions 22.5cm x 16cm. For use with special wicks art. HY T836 and HY T837 Silicone molds can be used for processing various raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€23.00Price
€10.00Price
Transparent glycerin for making soaps, 0.5 kg package (gross weight 0.525 kg)
€10.00Price
Transparent glycerin for making soaps, 0.5 kg package (gross weight 0.525 kg)
Transparent glycerin for making soaps, 0.5 kg package (gross weight 0.525 kg)
€10.00Price
€30.00Price
Height: 14.5 cm - Diameter: 2 cm - Wax weight: 25 g - Recommended wick: 3 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€30.00Price
Height: 14.5 cm - Diameter: 2 cm - Wax weight: 25 g - Recommended wick: 3 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Height: 14.5 cm - Diameter: 2 cm - Wax weight: 25 g - Recommended wick: 3 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€30.00Price
€17.00Price
Silicone spray for spraying on candle molds for easy extraction 400 ml size
€17.00Price
Silicone spray for spraying on candle molds for easy extraction 400 ml size
Silicone spray for spraying on candle molds for easy extraction 400 ml size
€17.00Price
€23.00Price
Flexible silicone soap moldMold for 6 soap barsWeight: 0.29 kgSize: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
€23.00Price
Flexible silicone soap moldMold for 6 soap barsWeight: 0.29 kgSize: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
Flexible silicone soap moldMold for 6 soap barsWeight: 0.29 kgSize: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
€23.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€99.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€99.00Price
€99.00Price
Height: 200 mm Wax weight: 365 g Recommended wick: 3 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€99.00Price
Height: 200 mm Wax weight: 365 g Recommended wick: 3 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Height: 200 mm Wax weight: 365 g Recommended wick: 3 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€99.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€18.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€18.80Price
€18.80Price
Height: 15 mm - Wax weight: 10 g - Recommended wick: 1.5 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€18.80Price
Height: 15 mm - Wax weight: 10 g - Recommended wick: 1.5 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Height: 15 mm - Wax weight: 10 g - Recommended wick: 1.5 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€18.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€18.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€18.80Price
€18.80Price
Mold height: 60 mm - Wick: 3 mm - Weight: 65 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€18.80Price
Mold height: 60 mm - Wick: 3 mm - Weight: 65 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
Mold height: 60 mm - Wick: 3 mm - Weight: 65 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€18.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€27.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€27.80Price
€27.80Price
Silicone mold in the shape of a sitting teddy bearMold height: 7 cm - Weight: 35 g Wick: 2 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€27.80Price
Silicone mold in the shape of a sitting teddy bearMold height: 7 cm - Weight: 35 g Wick: 2 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Silicone mold in the shape of a sitting teddy bearMold height: 7 cm - Weight: 35 g Wick: 2 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€27.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€17.50Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€17.50Price
€17.50Price
Silicone candle mold with BUGNO VILLICO Mold height: 45 mm - Wick: mm -Weight: 30 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€17.50Price
Silicone candle mold with BUGNO VILLICO Mold height: 45 mm - Wick: mm -Weight: 30 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Silicone candle mold with BUGNO VILLICO Mold height: 45 mm - Wick: mm -Weight: 30 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€17.50Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€36.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€36.80Price
€36.80Price
Silicone candle mold with SMALL BALEMold height: 70 mm - Diameter: 70 mm - Wick: 3 mm- Weight: 190 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€36.80Price
Silicone candle mold with SMALL BALEMold height: 70 mm - Diameter: 70 mm - Wick: 3 mm- Weight: 190 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Silicone candle mold with SMALL BALEMold height: 70 mm - Diameter: 70 mm - Wick: 3 mm- Weight: 190 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€36.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€23.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€23.00Price
€23.00Price
Dimensions 22.5cm x 16cm. For use with special wicks art. HY T836 and HY T837 Silicone molds can be used for processing various raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€23.00Price
Dimensions 22.5cm x 16cm. For use with special wicks art. HY T836 and HY T837 Silicone molds can be used for processing various raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Dimensions 22.5cm x 16cm. For use with special wicks art. HY T836 and HY T837 Silicone molds can be used for processing various raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€23.00Price
€12.00Price
Cocoa butter base for making soaps, 0.5 kg package (gross weight 0.525 kg)
€12.00Price
Cocoa butter base for making soaps, 0.5 kg package (gross weight 0.525 kg)
Cocoa butter base for making soaps, 0.5 kg package (gross weight 0.525 kg)
€12.00Price
€12.00Price
Weight: 0.03 kg - Size: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
€12.00Price
Weight: 0.03 kg - Size: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
Weight: 0.03 kg - Size: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
€12.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€27.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€27.80Price
€27.80Price
Height: 40 mmWax weight: 55 gRecommended wick: 2 mmSilicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€27.80Price
Height: 40 mmWax weight: 55 gRecommended wick: 2 mmSilicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Height: 40 mmWax weight: 55 gRecommended wick: 2 mmSilicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€27.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€24.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€24.00Price
€24.00Price
Silicone candle mold with molded bee Height: 70 mm - Wax weight: 35 g - Recommended wick: 2 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€24.00Price
Silicone candle mold with molded bee Height: 70 mm - Wax weight: 35 g - Recommended wick: 2 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Silicone candle mold with molded bee Height: 70 mm - Wax weight: 35 g - Recommended wick: 2 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€24.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€51.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€51.80Price
€51.80Price
Height: 110 mm Wax weight: 150 g Without wick Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€51.80Price
Height: 110 mm Wax weight: 150 g Without wick Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Height: 110 mm Wax weight: 150 g Without wick Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€51.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€21.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€21.80Price
€21.80Price
Mold height: 45 mm - Wick: 3 mm - Weight: 35 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€21.80Price
Mold height: 45 mm - Wick: 3 mm - Weight: 35 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
Mold height: 45 mm - Wick: 3 mm - Weight: 35 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€21.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€32.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€32.80Price
€32.80Price
Mold height: 90 mm - Diameter: 70 mm - Wick: 2 mm -Weight:200 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€32.80Price
Mold height: 90 mm - Diameter: 70 mm - Wick: 2 mm -Weight:200 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Mold height: 90 mm - Diameter: 70 mm - Wick: 2 mm -Weight:200 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€32.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€22.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€22.80Price
€22.80Price
Silicone candle mold with small cube 45mmMold height: 45 mm - Wick: 3 mm - Weight: 85 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€22.80Price
Silicone candle mold with small cube 45mmMold height: 45 mm - Wick: 3 mm - Weight: 85 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
Silicone candle mold with small cube 45mmMold height: 45 mm - Wick: 3 mm - Weight: 85 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€22.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€30.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€30.00Price
€30.00Price
Mold height: 145 mmDiameter: 18 mmRecommended wick: 1.5 mmWeight: 20 gSilicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€30.00Price
Mold height: 145 mmDiameter: 18 mmRecommended wick: 1.5 mmWeight: 20 gSilicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Mold height: 145 mmDiameter: 18 mmRecommended wick: 1.5 mmWeight: 20 gSilicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€30.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€23.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€23.00Price
€23.00Price
Dimensions 22.5cm x 16cm. For use with special wicks art. HY T836 and HY T837 Silicone molds can be used for processing various raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€23.00Price
Dimensions 22.5cm x 16cm. For use with special wicks art. HY T836 and HY T837 Silicone molds can be used for processing various raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Dimensions 22.5cm x 16cm. For use with special wicks art. HY T836 and HY T837 Silicone molds can be used for processing various raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€23.00Price
€3.50Price
Set for lumino, consisting of: 30 aluminum containers and 30 wicks (30 threads)Aluminum containers diameter 35 mm height 15 mmWaxed wick 30 threadsReplace wick 30 threads (Cod. HY T836) and 39 threads (Cod. HY T837)Also available a wide range of dyes (Cod. HY BR) and fragrances (Cod. HY FRAGRANCE)
€3.50Price
Set for lumino, consisting of: 30 aluminum containers and 30 wicks (30 threads)Aluminum containers diameter 35 mm height 15 mmWaxed wick 30 threadsReplace wick 30 threads (Cod. HY T836) and 39 threads (Cod. HY T837)Also available a wide range of dyes (Cod. HY BR) and fragrances (Cod. HY FRAGRANCE)
Set for lumino, consisting of: 30 aluminum containers and 30 wicks (30 threads)Aluminum containers diameter 35 mm height 15 mmWaxed wick 30 threadsReplace wick 30 threads (Cod. HY T836) and 39 threads (Cod. HY T837)Also available a wide range of dyes (Cod. HY BR) and fragrances (Cod. HY FRAGRANCE)
€3.50Price
€4.80Price
Lavender essential oil 10ml for scenting soaps, 10ml size (gross weight 42 g)
€4.80Price
Lavender essential oil 10ml for scenting soaps, 10ml size (gross weight 42 g)
Lavender essential oil 10ml for scenting soaps, 10ml size (gross weight 42 g)
€4.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€72.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€72.80Price
€72.80Price
Silicone gnome candle mold Height: 110mm - Weight: 0.790kg Wax weight: 155g - Wick: 3mm Mold diameter: 75mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€72.80Price
Silicone gnome candle mold Height: 110mm - Weight: 0.790kg Wax weight: 155g - Wick: 3mm Mold diameter: 75mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Silicone gnome candle mold Height: 110mm - Weight: 0.790kg Wax weight: 155g - Wick: 3mm Mold diameter: 75mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€72.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€15.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€15.00Price
€15.00Price
mold diameter: 55 mm Mold weight 0.070 kg Wax weight 10 gWickless Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€15.00Price
mold diameter: 55 mm Mold weight 0.070 kg Wax weight 10 gWickless Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
mold diameter: 55 mm Mold weight 0.070 kg Wax weight 10 gWickless Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€15.00Price
€12.00Price
Flexible silicone soap moldWeight: 0.04 kgSize: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
€12.00Price
Flexible silicone soap moldWeight: 0.04 kgSize: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
Flexible silicone soap moldWeight: 0.04 kgSize: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
€12.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€33.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€33.00Price
€33.00Price
Silicone mold for large molded bee candle Height: 155 mm - Wax weight: 50 g - Recommended wick: 2 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€33.00Price
Silicone mold for large molded bee candle Height: 155 mm - Wax weight: 50 g - Recommended wick: 2 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Silicone mold for large molded bee candle Height: 155 mm - Wax weight: 50 g - Recommended wick: 2 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€33.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold with wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€40.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold with wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€40.00Price
€40.00Price
Silicone mold for candle smooth cylinder (medium) Mold height: 120 mm - Wax weight: 205 g - Recommended wick: 2 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€40.00Price
Silicone mold for candle smooth cylinder (medium) Mold height: 120 mm - Wax weight: 205 g - Recommended wick: 2 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Silicone mold for candle smooth cylinder (medium) Mold height: 120 mm - Wax weight: 205 g - Recommended wick: 2 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€40.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€26.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€26.80Price
€26.80Price
Mold height: 75 mm - Wick: 3 mm - Weight: 45 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€26.80Price
Mold height: 75 mm - Wick: 3 mm - Weight: 45 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
Mold height: 75 mm - Wick: 3 mm - Weight: 45 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€26.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€19.50Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€19.50Price
€19.50Price
Mold height: 60 mm - Wick: 3 mm - Weight: 30 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€19.50Price
Mold height: 60 mm - Wick: 3 mm - Weight: 30 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
Mold height: 60 mm - Wick: 3 mm - Weight: 30 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€19.50Price
€6.00Price
Wick made of paraffin-impregnated cotton filaments - wick height 25 mm with 3x10 weave, 30 strands, the more strands the wick has, the higher the flame.15 mm diameter tin base, 100% ready to usePack of 100 piecesBurn evenly and do not make smoke. They are ideal for both hobbyists and professionals.
€6.00Price
Wick made of paraffin-impregnated cotton filaments - wick height 25 mm with 3x10 weave, 30 strands, the more strands the wick has, the higher the flame.15 mm diameter tin base, 100% ready to usePack of 100 piecesBurn evenly and do not make smoke. They are ideal for both hobbyists and professionals.
Wick made of paraffin-impregnated cotton filaments - wick height 25 mm with 3x10 weave, 30 strands, the more strands the wick has, the higher the flame.15 mm diameter tin base, 100% ready to usePack of 100 piecesBurn evenly and do not make smoke. They are ideal for both hobbyists and professionals.
€6.00Price
€2.80Price
Pigments for soaps size 10 ml colors available: BLUE - RED - GREEN - VIOLET
€2.80Price
Pigments for soaps size 10 ml colors available: BLUE - RED - GREEN - VIOLET
Pigments for soaps size 10 ml colors available: BLUE - RED - GREEN - VIOLET
€2.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€16.20Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€16.20Price
€16.20Price
Mold diameter: 45mm - wick 3mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€16.20Price
Mold diameter: 45mm - wick 3mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
Mold diameter: 45mm - wick 3mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€16.20Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€11.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€11.80Price
€11.80Price
Mold diameter: 4.7CM - Wax weight: 0.02 kg - Silicone weight: 0.05 kgCandle height: 1.8cm - Candle diameter: 3.5 cmRecommended wick: 2 mmSilicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base.They are not suitable for food production.
€11.80Price
Mold diameter: 4.7CM - Wax weight: 0.02 kg - Silicone weight: 0.05 kgCandle height: 1.8cm - Candle diameter: 3.5 cmRecommended wick: 2 mmSilicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base.They are not suitable for food production.
Mold diameter: 4.7CM - Wax weight: 0.02 kg - Silicone weight: 0.05 kgCandle height: 1.8cm - Candle diameter: 3.5 cmRecommended wick: 2 mmSilicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base.They are not suitable for food production.
€11.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€55.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€55.80Price
€55.80Price
Silicone candle mold with CUBE 95mmMold height: 95 mm - Wick: 3 mm - Weight: 330 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€55.80Price
Silicone candle mold with CUBE 95mmMold height: 95 mm - Wick: 3 mm - Weight: 330 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Silicone candle mold with CUBE 95mmMold height: 95 mm - Wick: 3 mm - Weight: 330 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€55.80Price
€6.00Price
Wick made of paraffin-impregnated cotton filaments - wick height 25 mm with 3x13 weave - 39 threads, The more threads the wick has, the higher the flame.15 mm diameter tin base, 100% ready to usePack of 100 piecesBurn evenly and do not make smoke. They are ideal for both hobbyists and professionals.
€6.00Price
Wick made of paraffin-impregnated cotton filaments - wick height 25 mm with 3x13 weave - 39 threads, The more threads the wick has, the higher the flame.15 mm diameter tin base, 100% ready to usePack of 100 piecesBurn evenly and do not make smoke. They are ideal for both hobbyists and professionals.
Wick made of paraffin-impregnated cotton filaments - wick height 25 mm with 3x13 weave - 39 threads, The more threads the wick has, the higher the flame.15 mm diameter tin base, 100% ready to usePack of 100 piecesBurn evenly and do not make smoke. They are ideal for both hobbyists and professionals.
€6.00Price
€12.00Price
Flexible silicone soap moldWeight: 0.04 kgSize: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
€12.00Price
Flexible silicone soap moldWeight: 0.04 kgSize: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
Flexible silicone soap moldWeight: 0.04 kgSize: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
€12.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€18.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€18.80Price
€18.80Price
Mold height: 30 mm - Wick: 3 mm - Weight: 20 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€18.80Price
Mold height: 30 mm - Wick: 3 mm - Weight: 20 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
Mold height: 30 mm - Wick: 3 mm - Weight: 20 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€18.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€30.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€30.00Price
€30.00Price
Silicone candle mold with Beehives Straw 90 mm Mold height: 90 mm - Wick: 3 mm - Weight: 75 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base.They are not suitable for food production.
€30.00Price
Silicone candle mold with Beehives Straw 90 mm Mold height: 90 mm - Wick: 3 mm - Weight: 75 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base.They are not suitable for food production.
Silicone candle mold with Beehives Straw 90 mm Mold height: 90 mm - Wick: 3 mm - Weight: 75 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base.They are not suitable for food production.
€30.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€46.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€46.00Price
€46.00Price
Silicone candle mold with smooth domed thin cylinder Mold height: 135 mm - Diameter: 65 mm - Wick: 3 - Weight: 375 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€46.00Price
Silicone candle mold with smooth domed thin cylinder Mold height: 135 mm - Diameter: 65 mm - Wick: 3 - Weight: 375 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Silicone candle mold with smooth domed thin cylinder Mold height: 135 mm - Diameter: 65 mm - Wick: 3 - Weight: 375 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€46.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€15.50Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€15.50Price
€15.50Price
Mold height: 50 mm - Wick: 3 mm - Wax weight : 15 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€15.50Price
Mold height: 50 mm - Wick: 3 mm - Wax weight : 15 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Mold height: 50 mm - Wick: 3 mm - Wax weight : 15 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€15.50Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€35.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€35.80Price
€35.80Price
Mold height: 50mm diameter 60mm - wick 1.5mm - Wax weight 80g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€35.80Price
Mold height: 50mm diameter 60mm - wick 1.5mm - Wax weight 80g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Mold height: 50mm diameter 60mm - wick 1.5mm - Wax weight 80g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€35.80Price
€12.00Price
Flexible silicone soap moldWeight: 0.04 kgSize: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
€12.00Price
Flexible silicone soap moldWeight: 0.04 kgSize: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
Flexible silicone soap moldWeight: 0.04 kgSize: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
€12.00Price
€4.80Price
Woven white cotton candle wick in skeins -LENGTH 20 metersWick diameter: 1.5 - 2 - 3 mm in choice
€4.80Price
Woven white cotton candle wick in skeins -LENGTH 20 metersWick diameter: 1.5 - 2 - 3 mm in choice
Woven white cotton candle wick in skeins -LENGTH 20 metersWick diameter: 1.5 - 2 - 3 mm in choice
€4.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€17.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€17.80Price
€17.80Price
Silicone candle mold with SMALL BEES Mold height: 65 mm - Wick: 3 mm - Weight: 25 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base.They are not suitable for food production.
€17.80Price
Silicone candle mold with SMALL BEES Mold height: 65 mm - Wick: 3 mm - Weight: 25 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base.They are not suitable for food production.
Silicone candle mold with SMALL BEES Mold height: 65 mm - Wick: 3 mm - Weight: 25 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base.They are not suitable for food production.
€17.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€39.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€39.00Price
€39.00Price
Silicone candle mold with small smooth cylinder Mold height: 105 mm - Diameter: 65 mm - Wick: 3 mm - Weight: 285 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€39.00Price
Silicone candle mold with small smooth cylinder Mold height: 105 mm - Diameter: 65 mm - Wick: 3 mm - Weight: 285 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Silicone candle mold with small smooth cylinder Mold height: 105 mm - Diameter: 65 mm - Wick: 3 mm - Weight: 285 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€39.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€15.50Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€15.50Price
€15.50Price
Mold height: 35 mm - Wick: 2 mm - Weight: 5 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€15.50Price
Mold height: 35 mm - Wick: 2 mm - Weight: 5 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
Mold height: 35 mm - Wick: 2 mm - Weight: 5 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€15.50Price
€12.00Price
Flexible silicone soap moldWeight: 0.03 kgMeasures: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
€12.00Price
Flexible silicone soap moldWeight: 0.03 kgMeasures: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
Flexible silicone soap moldWeight: 0.03 kgMeasures: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
€12.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€42.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€42.00Price
€42.00Price
Silicone candle mold with small Beehive Mold height: 90 mm - Wick: 3 mm - Weight: 230 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base.They are not suitable for food production.
€42.00Price
Silicone candle mold with small Beehive Mold height: 90 mm - Wick: 3 mm - Weight: 230 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base.They are not suitable for food production.
Silicone candle mold with small Beehive Mold height: 90 mm - Wick: 3 mm - Weight: 230 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base.They are not suitable for food production.
€42.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€32.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€32.00Price
€32.00Price
Silicone candle mold with twisted cylinder Mold height: 85 mm - Diameter: 70 mm - Wick: 3 mm - Weight: 270 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€32.00Price
Silicone candle mold with twisted cylinder Mold height: 85 mm - Diameter: 70 mm - Wick: 3 mm - Weight: 270 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Silicone candle mold with twisted cylinder Mold height: 85 mm - Diameter: 70 mm - Wick: 3 mm - Weight: 270 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€32.00Price
€1.50Price
Braided white cotton candle wick - Diameter : 2 mmQuantity : 10 mt
€1.50Price
Braided white cotton candle wick - Diameter : 2 mmQuantity : 10 mt
Braided white cotton candle wick - Diameter : 2 mmQuantity : 10 mt
€1.50Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€19.90Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€19.90Price
€19.90Price
Silicone candle mold with bee on honeycomb Mold height: 35 mm - Wick: 3 mmWeight: 40 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base.They are not suitable for food production.
€19.90Price
Silicone candle mold with bee on honeycomb Mold height: 35 mm - Wick: 3 mmWeight: 40 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base.They are not suitable for food production.
Silicone candle mold with bee on honeycomb Mold height: 35 mm - Wick: 3 mmWeight: 40 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base.They are not suitable for food production.
€19.90Price
€12.00Price
Flexible silicone soap moldWeight: 0.04 kgSize: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
€12.00Price
Flexible silicone soap moldWeight: 0.04 kgSize: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
Flexible silicone soap moldWeight: 0.04 kgSize: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
€12.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€49.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€49.00Price
€49.00Price
Mold height: 95 mm - Wick: 3 mm - Weight: 125 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€49.00Price
Mold height: 95 mm - Wick: 3 mm - Weight: 125 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
Mold height: 95 mm - Wick: 3 mm - Weight: 125 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€49.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€34.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€34.00Price
€34.00Price
Silicone candle mold with cylinder with braided rope Mold height: 70 mm - Diameter: 60 mm - Wick: 3 mm - Weight 170 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€34.00Price
Silicone candle mold with cylinder with braided rope Mold height: 70 mm - Diameter: 60 mm - Wick: 3 mm - Weight 170 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Silicone candle mold with cylinder with braided rope Mold height: 70 mm - Diameter: 60 mm - Wick: 3 mm - Weight 170 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€34.00Price
€12.90Price
Stainless steel pot with spout for easy pouringCapacity: 1.3 LDDiameter 12 cm.Heat- and corrosion-resistant, oxidation-resistant, durable.Ideal for melting wax in a water bath and making wonderful candles!
€12.90Price
Stainless steel pot with spout for easy pouringCapacity: 1.3 LDDiameter 12 cm.Heat- and corrosion-resistant, oxidation-resistant, durable.Ideal for melting wax in a water bath and making wonderful candles!
Stainless steel pot with spout for easy pouringCapacity: 1.3 LDDiameter 12 cm.Heat- and corrosion-resistant, oxidation-resistant, durable.Ideal for melting wax in a water bath and making wonderful candles!
€12.90Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€43.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€43.00Price
€43.00Price
Height: 90 mm - Diameter: 60 mm - Recommended wick: 3 mm - Weight 225 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€43.00Price
Height: 90 mm - Diameter: 60 mm - Recommended wick: 3 mm - Weight 225 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Height: 90 mm - Diameter: 60 mm - Recommended wick: 3 mm - Weight 225 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€43.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€10.90Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€10.90Price
€10.90Price
Silicone candle mold with CELLSMold height: 30mmMold diameter: 45mmMold diameter: 3mmWeight: 40Candle size:Height: 15mmDiameter: 35mmWax weight 10g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base.They are not suitable for food production.
€10.90Price
Silicone candle mold with CELLSMold height: 30mmMold diameter: 45mmMold diameter: 3mmWeight: 40Candle size:Height: 15mmDiameter: 35mmWax weight 10g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base.They are not suitable for food production.
Silicone candle mold with CELLSMold height: 30mmMold diameter: 45mmMold diameter: 3mmWeight: 40Candle size:Height: 15mmDiameter: 35mmWax weight 10g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base.They are not suitable for food production.
€10.90Price
€12.00Price
Flexible silicone soap moldWeight: 0.04 kgSize: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
€12.00Price
Flexible silicone soap moldWeight: 0.04 kgSize: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
Flexible silicone soap moldWeight: 0.04 kgSize: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
€12.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€36.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€36.00Price
€36.00Price
Mold height: 95 mm - Diameter: 60 mm - Wick: 3 mm -Weight: 135 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€36.00Price
Mold height: 95 mm - Diameter: 60 mm - Wick: 3 mm -Weight: 135 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Mold height: 95 mm - Diameter: 60 mm - Wick: 3 mm -Weight: 135 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€36.00Price
€8.00Price
Stainless steel bowl with supporting handles. Size: 14 x 25 cm Corrosion-resistant, oxidation-resistant, durable Ideal for melting wax in a water bath and making wonderful candles! Can also be used for melting chocolate and other foods.
€8.00Price
Stainless steel bowl with supporting handles. Size: 14 x 25 cm Corrosion-resistant, oxidation-resistant, durable Ideal for melting wax in a water bath and making wonderful candles! Can also be used for melting chocolate and other foods.
Stainless steel bowl with supporting handles. Size: 14 x 25 cm Corrosion-resistant, oxidation-resistant, durable Ideal for melting wax in a water bath and making wonderful candles! Can also be used for melting chocolate and other foods.
€8.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€32.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€32.00Price
€32.00Price
Mold height: 4 cm Diameter: 7.5 cm - Wax weight: 77 g Recommended wick: 3 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€32.00Price
Mold height: 4 cm Diameter: 7.5 cm - Wax weight: 77 g Recommended wick: 3 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Mold height: 4 cm Diameter: 7.5 cm - Wax weight: 77 g Recommended wick: 3 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€32.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€17.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€17.80Price
€17.80Price
Silicone candle mold with CELLETS WITH BEES Mold height: 40 mm Mold diameter: 60 mm - Wick: 3 mm -Weight: 0.1 kg Candle size Height: 20mm - Diameter: 45mm - Wax weight 20g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base.They are not suitable for food production.
€17.80Price
Silicone candle mold with CELLETS WITH BEES Mold height: 40 mm Mold diameter: 60 mm - Wick: 3 mm -Weight: 0.1 kg Candle size Height: 20mm - Diameter: 45mm - Wax weight 20g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base.They are not suitable for food production.
Silicone candle mold with CELLETS WITH BEES Mold height: 40 mm Mold diameter: 60 mm - Wick: 3 mm -Weight: 0.1 kg Candle size Height: 20mm - Diameter: 45mm - Wax weight 20g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base.They are not suitable for food production.
€17.80Price
€12.00Price
Flexible silicone soap moldWeight: 0.03 kgMeasures: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
€12.00Price
Flexible silicone soap moldWeight: 0.03 kgMeasures: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
Flexible silicone soap moldWeight: 0.03 kgMeasures: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
€12.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€34.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€34.00Price
€34.00Price
Mold height: 90 mm - Wick: 3 mm - Weight: 70 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€34.00Price
Mold height: 90 mm - Wick: 3 mm - Weight: 70 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
Mold height: 90 mm - Wick: 3 mm - Weight: 70 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€34.00Price
- New
€17.00Price
Stainless steel wax melting kit with candle-making materials Includes:- Stainless steel pot with spout for easy pouring Heat- and corrosion-resistant, oxidation-resistant, durable.Heat-resistant handle- Capacity: 1.3 L- 12 cm diameter- Cotton wicks- Wick centering device- Stickers for DIY soy candle making- Stainless steel spoon
- New
€17.00Price
Stainless steel wax melting kit with candle-making materials Includes:- Stainless steel pot with spout for easy pouring Heat- and corrosion-resistant, oxidation-resistant, durable.Heat-resistant handle- Capacity: 1.3 L- 12 cm diameter- Cotton wicks- Wick centering device- Stickers for DIY soy candle making- Stainless steel spoon
- New
Stainless steel wax melting kit with candle-making materials Includes:- Stainless steel pot with spout for easy pouring Heat- and corrosion-resistant, oxidation-resistant, durable.Heat-resistant handle- Capacity: 1.3 L- 12 cm diameter- Cotton wicks- Wick centering device- Stickers for DIY soy candle making- Stainless steel spoon
€17.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€24.90Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€24.90Price
€24.90Price
Mold height: 50 mm - Wick: 3 mm - Wax weight : 40 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€24.90Price
Mold height: 50 mm - Wick: 3 mm - Wax weight : 40 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Mold height: 50 mm - Wick: 3 mm - Wax weight : 40 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€24.90Price
€12.00Price
Flexible silicone soap moldWeight: 0.04 kg - Measures: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
€12.00Price
Flexible silicone soap moldWeight: 0.04 kg - Measures: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
Flexible silicone soap moldWeight: 0.04 kg - Measures: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
€12.00Price
- New
€17.00Price
Kit for water bath melting of wax, kerosene, cake ingredients or other. Includes:- Stainless steel pot, 14 cm diameter- Stainless steel bain-marie pot with 11 cm long handle, 11 cm diameter, with two spouts
- New
€17.00Price
Kit for water bath melting of wax, kerosene, cake ingredients or other. Includes:- Stainless steel pot, 14 cm diameter- Stainless steel bain-marie pot with 11 cm long handle, 11 cm diameter, with two spouts
- New
Kit for water bath melting of wax, kerosene, cake ingredients or other. Includes:- Stainless steel pot, 14 cm diameter- Stainless steel bain-marie pot with 11 cm long handle, 11 cm diameter, with two spouts
€17.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€26.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€26.80Price
€26.80Price
Mold height: 60 mm - Wick: 3 mm - Weight: 30 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€26.80Price
Mold height: 60 mm - Wick: 3 mm - Weight: 30 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
Mold height: 60 mm - Wick: 3 mm - Weight: 30 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€26.80Price
€12.00Price
Flexible silicone soap moldWeight: 0.04 kg - Measures: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
€12.00Price
Flexible silicone soap moldWeight: 0.04 kg - Measures: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
Flexible silicone soap moldWeight: 0.04 kg - Measures: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
€12.00Price
- New
€19.00Price
Stainless steel bain-marie pot, pour spout, with melting bowl and stirring spoonCompatible with gas, electric and induction cookersCapacity: 400 g approx.
- New
€19.00Price
Stainless steel bain-marie pot, pour spout, with melting bowl and stirring spoonCompatible with gas, electric and induction cookersCapacity: 400 g approx.
- New
Stainless steel bain-marie pot, pour spout, with melting bowl and stirring spoonCompatible with gas, electric and induction cookersCapacity: 400 g approx.
€19.00Price
€17.00Price
Flexible silicone soap mold - Weight: 0.04 kgThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
€17.00Price
Flexible silicone soap mold - Weight: 0.04 kgThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
Flexible silicone soap mold - Weight: 0.04 kgThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
€17.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€32.90Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€32.90Price
€32.90Price
Mold height: 65 mm- Wick: 3 mm- Weight: 40 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€32.90Price
Mold height: 65 mm- Wick: 3 mm- Weight: 40 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
Mold height: 65 mm- Wick: 3 mm- Weight: 40 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€32.90Price
- New
€7.80Price
Stainless steel wax melting pot, water bath with heat-resistant handle, non-drip spout.Includes a stainless steel strainer of the same diameter as the pot.Useful for DIY candle making.
- New
€7.80Price
Stainless steel wax melting pot, water bath with heat-resistant handle, non-drip spout.Includes a stainless steel strainer of the same diameter as the pot.Useful for DIY candle making.
- New
Stainless steel wax melting pot, water bath with heat-resistant handle, non-drip spout.Includes a stainless steel strainer of the same diameter as the pot.Useful for DIY candle making.
€7.80Price