Vendita di attrezzature per l'apicoltura, arnie, smelatori e maturatori, miele e polline della Valtellina

Front reinforcing spacer for Honey super and honeycomb D.B. 6-notch polystyrene framesFor Beehives or polystyrene honeycombs with 20 mm thick wallsDimensions: 27.5 × 2.2 × 2.8 cm

Front reinforcing spacer for Honey super and honeycomb D.B. 6-notch polystyrene framesFor Beehives or polystyrene honeycombs with 20 mm thick wallsDimensions: 27.5 × 2.2 × 2.8 cm

- Beehives polystyrene nest D.B. 6 frames Reinforced edge1) Full bottom net, fixed bottom, reinforced edge (YELLOW) (Cod. QI A103B)2) Full bottom net, movable bottom, reinforced edge (GREEN) (Cod. QI A77B)3) Divisible, fixed bottom, reinforced edge (BLUE) (QI Cod. A131)4) Divisible, movable bottom, reinforced edge (RED) (QI Cod. A131G) -- For Accessories and spare parts see below- To order product CLICK on (code in orange)

- Beehives polystyrene nest D.B. 6 frames Reinforced edge1) Full bottom net, fixed bottom, reinforced edge (YELLOW) (Cod. QI A103B)2) Full bottom net, movable bottom, reinforced edge (GREEN) (Cod. QI A77B)3) Divisible, fixed bottom, reinforced edge (BLUE) (QI Cod. A131)4) Divisible, movable bottom, reinforced edge (RED) (QI Cod. A131G) -- For Accessories and spare parts see below- To order product CLICK on (code in orange)

- Beehives polystyrene nest D.B. 6-frame base1) Classic (Polystyrene (high density) (Cod. QI A41)2) Lightweight (Polystyrene (low density) - (Cod. QI A89)3) Total mesh bottom fixed bottom (Cod. QI A103)4) Total mesh bottom with removable drawer (QI Cod. A77)5) Spaced and ventilated total mesh bottom (QI Cod. A105)-For Accessories and spare parts see below- To order product CLICK on (code in orange)

- Beehives polystyrene nest D.B. 6-frame base1) Classic (Polystyrene (high density) (Cod. QI A41)2) Lightweight (Polystyrene (low density) - (Cod. QI A89)3) Total mesh bottom fixed bottom (Cod. QI A103)4) Total mesh bottom with removable drawer (QI Cod. A77)5) Spaced and ventilated total mesh bottom (QI Cod. A105)-For Accessories and spare parts see below- To order product CLICK on (code in orange)

NEW 6-FAVES Beehives high-density polystyrene BOTTOM TOTAL NET with YELLOW - UPPER REINFORCEMENT EDGING without PREDISPOSITION of guides for D.B. BASKET ON BOTTOM ARN. by 6 honeycombs made of high-density polystyrene (80)TOTAL NET at the bottom fixed 184x375Front openingAnti-movement spacers on the bottomColors light blue/pastel green depending on availabilityPolystyrene closing lidExterior dimensions 275 x 495 mmNucleus hive support feet placed on the side with full lengthUPPER REINFORCEMENT BORDER - Spare parts 41) Polystyrene hatch (Cod. QI P21)42) Polystyrene lid (Art. QI C16B)SEE accessories below

NEW 6-FAVES Beehives high-density polystyrene BOTTOM TOTAL NET with YELLOW - UPPER REINFORCEMENT EDGING without PREDISPOSITION of guides for D.B. BASKET ON BOTTOM ARN. by 6 honeycombs made of high-density polystyrene (80)TOTAL NET at the bottom fixed 184x375Front openingAnti-movement spacers on the bottomColors light blue/pastel green depending on availabilityPolystyrene closing lidExterior dimensions 275 x 495 mmNucleus hive support feet placed on the side with full lengthUPPER REINFORCEMENT BORDER - Spare parts 41) Polystyrene hatch (Cod. QI P21)42) Polystyrene lid (Art. QI C16B)SEE accessories below

Beehives D.B. 6-FAVES Beehives made of high-density polystyrene (80) - Wall thickness 2 cm - LATERAL NET at the bottom fixed anti-varroa -front opening - anti-frame movement spacers at the bottom - pastel colors - with polystyrene closing lidExterior dimensions 275 x 495 mm - Spare parts 41) Polystyrene door (No. QI P21)42) Polystyrene lid (Art. QI C16B)SEE accessories below

Beehives D.B. 6-FAVES Beehives made of high-density polystyrene (80) - Wall thickness 2 cm - LATERAL NET at the bottom fixed anti-varroa -front opening - anti-frame movement spacers at the bottom - pastel colors - with polystyrene closing lidExterior dimensions 275 x 495 mm - Spare parts 41) Polystyrene door (No. QI P21)42) Polystyrene lid (Art. QI C16B)SEE accessories below

Beehives from 6 honeycombs made of high-density polystyreneWith galvanized sheet metal rails for bottom - FOR FUND INSERTIONWith upper GREEN-colored reinforcing and anti-wear edging ARNIA D.B. by 6 honeycombs made of high-density polystyrene (80)Total mesh at the bottom fixed antivarroa 184x375Opening not centeredAnti-movement spacers at the bottomColors light blue/pastel green depending on availabilityPolystyrene closing lidExternal dimensions 275 x 495 mmNucleus hive support feet placed sideways with full lengthGalvanized sheet metal guides for bottom - FOR BOTTOM INSERT not includedWith upper GREEN edging for reinforcement and anti-wear. - Spare parts 41) Polystyrene hatch (Code QI P21)42) Polystyrene lid (Art. QI C16B) SEE accessories below

Beehives from 6 honeycombs made of high-density polystyreneWith galvanized sheet metal rails for bottom - FOR FUND INSERTIONWith upper GREEN-colored reinforcing and anti-wear edging ARNIA D.B. by 6 honeycombs made of high-density polystyrene (80)Total mesh at the bottom fixed antivarroa 184x375Opening not centeredAnti-movement spacers at the bottomColors light blue/pastel green depending on availabilityPolystyrene closing lidExternal dimensions 275 x 495 mmNucleus hive support feet placed sideways with full lengthGalvanized sheet metal guides for bottom - FOR BOTTOM INSERT not includedWith upper GREEN edging for reinforcement and anti-wear. - Spare parts 41) Polystyrene hatch (Code QI P21)42) Polystyrene lid (Art. QI C16B) SEE accessories below

Beehives 6 honeycombs divisible with upper blue reinforcing and wearproof edging on 4 sides Beehives D.B. from 6 honeycombs made of high-density polystyrene (80)Double anti-moth net on bottom fixed 77x375Double opening, front and rear Anti-honeycomb movement spacers on the bottomColors light blue/pastel green depending on availabilityWith polystyrene closing lidExterior dimensions 275 x 495 mmNucleus hive support feet placed sideways with full lengthComplete with upper plastic (ABS) edging to reinforce spacers and blue-colored side edgesDivisible into 2 bee colonies (3 + 3 combs)With internal grooves to accommodate dividing diaphragmStainless steel diaphragm for dividing Beehive 6 into 3+3 not included (Cod. D45)FAESTE diaphragm for dividing the Beehive from 6 into 3+3 not included (Ref. D48) - Spare parts 41) Polystyrene porch (Ref. QI P21)42) Polystyrene lid (Ref. QI C16B) SEE accessories below

Beehives 6 honeycombs divisible with upper blue reinforcing and wearproof edging on 4 sides Beehives D.B. from 6 honeycombs made of high-density polystyrene (80)Double anti-moth net on bottom fixed 77x375Double opening, front and rear Anti-honeycomb movement spacers on the bottomColors light blue/pastel green depending on availabilityWith polystyrene closing lidExterior dimensions 275 x 495 mmNucleus hive support feet placed sideways with full lengthComplete with upper plastic (ABS) edging to reinforce spacers and blue-colored side edgesDivisible into 2 bee colonies (3 + 3 combs)With internal grooves to accommodate dividing diaphragmStainless steel diaphragm for dividing Beehive 6 into 3+3 not included (Cod. D45)FAESTE diaphragm for dividing the Beehive from 6 into 3+3 not included (Ref. D48) - Spare parts 41) Polystyrene porch (Ref. QI P21)42) Polystyrene lid (Ref. QI C16B) SEE accessories below

BEEHIVES D.B. by 6 honeycombs made of high-density polystyrene (80)Double anti-moth net on bottom fixed 77x375Double opening, front and rear Anti-frame movement spacers on the bottomColors light blue/pastel green depending on availabilityPolystyrene closing lidExternal dimensions 275 x 495 mmNucleus hive support feet placed sideways with full lengthComplete with upper pink plastic (ABS) edging to reinforce spacers and side edgesDivisible in 2 bee colonies (3 + 3 frames)With internal grooves to accommodate dividing diaphragmGalvanized sheet metal guides for bottom - FOR optional BOTTOM INSERTION Art.F56Stainless steel diaphragm for dividing Beehive 6 into 3+3 not included (Item No. D45)FAESTE diaphragm for dividing Beehive 6 into 3+3 not included (Item No. D48) - Spare Parts 41) Polystyrene hatch (Item No. QI P21)42) Polystyrene lid (Item No. QI C16B) SEE accessories below

BEEHIVES D.B. by 6 honeycombs made of high-density polystyrene (80)Double anti-moth net on bottom fixed 77x375Double opening, front and rear Anti-frame movement spacers on the bottomColors light blue/pastel green depending on availabilityPolystyrene closing lidExternal dimensions 275 x 495 mmNucleus hive support feet placed sideways with full lengthComplete with upper pink plastic (ABS) edging to reinforce spacers and side edgesDivisible in 2 bee colonies (3 + 3 frames)With internal grooves to accommodate dividing diaphragmGalvanized sheet metal guides for bottom - FOR optional BOTTOM INSERTION Art.F56Stainless steel diaphragm for dividing Beehive 6 into 3+3 not included (Item No. D45)FAESTE diaphragm for dividing Beehive 6 into 3+3 not included (Item No. D48) - Spare Parts 41) Polystyrene hatch (Item No. QI P21)42) Polystyrene lid (Item No. QI C16B) SEE accessories below

Beehives D.B. 6-FAVES ECONOMIC low-density polystyrene (30) - Complete with polystyrene lid - Wall thickness 2 cm - Lateral mesh at the bottom fixed anti-varroa (52 x 320 mm) -front opening - anti-frame movement spacers on the bottom - white colorExternal measurements 275 x 495 mm - Spare parts 41) Polystyrene door (Code QI P21)42) Polystyrene lid (Art. QI C16B)SEE accessories below

Beehives D.B. 6-FAVES ECONOMIC low-density polystyrene (30) - Complete with polystyrene lid - Wall thickness 2 cm - Lateral mesh at the bottom fixed anti-varroa (52 x 320 mm) -front opening - anti-frame movement spacers on the bottom - white colorExternal measurements 275 x 495 mm - Spare parts 41) Polystyrene door (Code QI P21)42) Polystyrene lid (Art. QI C16B)SEE accessories below

D.B. 6-FAVES Beehives made of high-density polystyrene (80)Total mesh at the bottom fixed 184x375 mmAntivarroa Double opening front and back Anti-frame movement spacers at the bottomBeehive colors light blue/pastel green depending on availabilityPolystyrene closing lidNucleus hive support feet placed on the side with full lengthExterior measurements 275 x 495 mm - Spare parts:41) Polystyrene hatch (Art. QI P21)42) Polystyrene lid (Art. QI C16B) SEE accessories below

D.B. 6-FAVES Beehives made of high-density polystyrene (80)Total mesh at the bottom fixed 184x375 mmAntivarroa Double opening front and back Anti-frame movement spacers at the bottomBeehive colors light blue/pastel green depending on availabilityPolystyrene closing lidNucleus hive support feet placed on the side with full lengthExterior measurements 275 x 495 mm - Spare parts:41) Polystyrene hatch (Art. QI P21)42) Polystyrene lid (Art. QI C16B) SEE accessories below

Beehives D.B. 6-FAVES high-density (80) polystyrene Total mesh at the bottom fixed 184x375 fixed anti-varroa Double opening: front and rear Anti-frame movement spacers at the bottomBeehive colors light blue/pastel green depending on availabilityPolystyrene closing lidExterior dimensions 275 x 495 mmGalvanized sheet metal guides for bottom - FOR INSERTING BOTTOM PLATE OPTIONS: BOTTOM PLATE (Cod. QI F56) - Spare parts 41) Polystyrene door (Code QI P21)42) Polystyrene lid (Item QI C16B) SEE accessories below

Beehives D.B. 6-FAVES high-density (80) polystyrene Total mesh at the bottom fixed 184x375 fixed anti-varroa Double opening: front and rear Anti-frame movement spacers at the bottomBeehive colors light blue/pastel green depending on availabilityPolystyrene closing lidExterior dimensions 275 x 495 mmGalvanized sheet metal guides for bottom - FOR INSERTING BOTTOM PLATE OPTIONS: BOTTOM PLATE (Cod. QI F56) - Spare parts 41) Polystyrene door (Code QI P21)42) Polystyrene lid (Item QI C16B) SEE accessories below

White prepainted enameled steel drawer bottom for Dadant Blatt 6-frame blue polystyrene Beehives (code QI A77) Size: 445 x 218 x thickness 9 mm

White prepainted enameled steel drawer bottom for Dadant Blatt 6-frame blue polystyrene Beehives (code QI A77) Size: 445 x 218 x thickness 9 mm

6-FAVES D.B. BEEHIVES THE SPACED AREAS IN EPSIThe external design facilitates the handling and transport of the Beehives, aerated bottom, rear honeycomb locks to the bottom, anti book effect, new support feet, and most importantly as many as 4 spacers on 2 sides to create an air vortex between the Beehives during transport.THE SPACERS (4) with rounded shape, 15 mm thickness, height of no less than 230 mm are what is needed to give space to the Beehives once placed on the transport vehicle, provide greater stability to the load and, with the wide net on the bottom are what greatly reduce the risks of suffocation of the families.NET of l fixed anti varroa bottom 350x165mm Front openingHigh density of polystyrene (80)Anti-frame movement spacers on the bottomComplete with polystyrene closing lidExterior dimensions 275 x 495 mm4 Nucleus hive support feet placed2 spacers placed on 2 sides to create an air vortex between the Beehives during transport.

6-FAVES D.B. BEEHIVES THE SPACED AREAS IN EPSIThe external design facilitates the handling and transport of the Beehives, aerated bottom, rear honeycomb locks to the bottom, anti book effect, new support feet, and most importantly as many as 4 spacers on 2 sides to create an air vortex between the Beehives during transport.THE SPACERS (4) with rounded shape, 15 mm thickness, height of no less than 230 mm are what is needed to give space to the Beehives once placed on the transport vehicle, provide greater stability to the load and, with the wide net on the bottom are what greatly reduce the risks of suffocation of the families.NET of l fixed anti varroa bottom 350x165mm Front openingHigh density of polystyrene (80)Anti-frame movement spacers on the bottomComplete with polystyrene closing lidExterior dimensions 275 x 495 mm4 Nucleus hive support feet placed2 spacers placed on 2 sides to create an air vortex between the Beehives during transport.

Green polystyrene cover feeder for 6-frame Dadant Blatt polystyrene Beehives (Code QI A41 - QI A103 - QI A77) Including plastic syrup bell Capacity 1.7 Liters - Replacement bell (Code QI C97)

Green polystyrene cover feeder for 6-frame Dadant Blatt polystyrene Beehives (Code QI A41 - QI A103 - QI A77) Including plastic syrup bell Capacity 1.7 Liters - Replacement bell (Code QI C97)

Light blue polystyrene cover feeder for 6-frame D.B. Beehives (Cod. QI A41 - QI A89- QI A103 - QI A77- QI A105 - QI A97 Langstroth)Complete with clear plastic cover bell - - Replacement bell (cod. QI C97) - Capacity 3 Liters Replacement Vulcanello (QI C107)A new shape makes it unique and practical for feeding candy in pouches or not, or liquid food.

Light blue polystyrene cover feeder for 6-frame D.B. Beehives (Cod. QI A41 - QI A89- QI A103 - QI A77- QI A105 - QI A97 Langstroth)Complete with clear plastic cover bell - - Replacement bell (cod. QI C97) - Capacity 3 Liters Replacement Vulcanello (QI C107)A new shape makes it unique and practical for feeding candy in pouches or not, or liquid food.

Polystyrene cover feeder divided in two for 6-frame D.B. Beehives (Cod. QI A41 - QI A89- QI A103 - QI A77- QI A105 - QI A97 Langstroth)Complete with double transparent plastic cover bell - Replacement bell (Cod. QI C97)Double volcano (Cod. QI C107)Capacity 3 LitersDimensions 275 x 495 x 70 H mmA new shape makes it unique and practical for feeding candy in pouches or not, or liquid food.

Polystyrene cover feeder divided in two for 6-frame D.B. Beehives (Cod. QI A41 - QI A89- QI A103 - QI A77- QI A105 - QI A97 Langstroth)Complete with double transparent plastic cover bell - Replacement bell (Cod. QI C97)Double volcano (Cod. QI C107)Capacity 3 LitersDimensions 275 x 495 x 70 H mmA new shape makes it unique and practical for feeding candy in pouches or not, or liquid food.

For dividing Beehive of 6 into 3+3 (Cod.QI A131 and QI A131G)Made of stainless steelMeasures cm 47.3 x 32.6 sp 0.6It fits into the special groove Advantages using the stainless steel diaphragm:With the presence of propolis or wax in the groove enters more easilyThe 0.6 mm thickness, makes sure that the distance between the 2 neighboring combs are respected

For dividing Beehive of 6 into 3+3 (Cod.QI A131 and QI A131G)Made of stainless steelMeasures cm 47.3 x 32.6 sp 0.6It fits into the special groove Advantages using the stainless steel diaphragm:With the presence of propolis or wax in the groove enters more easilyThe 0.6 mm thickness, makes sure that the distance between the 2 neighboring combs are respected

Replacement polystyrene volcanel for polystyrene cable cover feeders (codes QI N07 and QI N12)

Replacement polystyrene volcanel for polystyrene cable cover feeders (codes QI N07 and QI N12)

For dividing the Beehive of 6 into 3+3 (Cod.QI A131 and QI A131G)MDF diaphragm For dividing the Beehive of 6 into 3+3 Art A131 or Art 131GIn faesite - MDF-Misure cm 47.3 x 32.6 sp 3 mmIt fits into the special grooveCompared to the model Art. D45 in stainless steel sp 0.6 mm , the space between the neighboring frames is reduced

For dividing the Beehive of 6 into 3+3 (Cod.QI A131 and QI A131G)MDF diaphragm For dividing the Beehive of 6 into 3+3 Art A131 or Art 131GIn faesite - MDF-Misure cm 47.3 x 32.6 sp 3 mmIt fits into the special grooveCompared to the model Art. D45 in stainless steel sp 0.6 mm , the space between the neighboring frames is reduced

HONEY super D.B. 6-frame high-density polystyrene Wall thickness 20 mm For Honey super D. Beehives. B. polystyrene (Ref. QI A41 - QI A103 - QI A77)

HONEY super D.B. 6-frame high-density polystyrene Wall thickness 20 mm For Honey super D. Beehives. B. polystyrene (Ref. QI A41 - QI A103 - QI A77)

Polystyrene door for 6-frame Beehive (Ref. QI A41 - QI A103 - QI A77)

Polystyrene door for 6-frame Beehive (Ref. QI A41 - QI A103 - QI A77)

Metal hatch for Beehives 6 honeycombs made of polystyrene, stable fixation for transportationBeehives ( Code QI A41 - QI A89- QI A103 - QI A77- QI A105 - QI A97 Langstroth)Consists of 2 pieces - base and slider (screws excluded) 3 positions, closed - open - anti-packing half-openCURSOR REPLACEMENT: (Code QI P36)

Metal hatch for Beehives 6 honeycombs made of polystyrene, stable fixation for transportationBeehives ( Code QI A41 - QI A89- QI A103 - QI A77- QI A105 - QI A97 Langstroth)Consists of 2 pieces - base and slider (screws excluded) 3 positions, closed - open - anti-packing half-openCURSOR REPLACEMENT: (Code QI P36)

Metal replacement slider for hatch (QI No. P35) for 6-frame polystyrene Beehives3 positions: Closed . Open- Semi-open for anti-looting.

Metal replacement slider for hatch (QI No. P35) for 6-frame polystyrene Beehives3 positions: Closed . Open- Semi-open for anti-looting.

Replacement lid made of high-density polystyrene, for 6-frame Dadant Blatt polystyrene Beehives(Code QI A41 -QI A103 - QI A77 (COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)

Replacement lid made of high-density polystyrene, for 6-frame Dadant Blatt polystyrene Beehives(Code QI A41 -QI A103 - QI A77 (COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)

Front reinforcing spacer for D.B. 6 notch polystyrene beehives and honeycombs For polystyrene beehives or honeycombs with 20mm thick walls (No. 1 Piece)6 notch polystyrene hive reinforcing spacer, two for each hive - Dimensions: Inner L=23.2cm Outer L=27.3 cmFor items No. QI A41 and QI A77 Nucleus hives - QI M60 Honey super

Front reinforcing spacer for D.B. 6 notch polystyrene beehives and honeycombs For polystyrene beehives or honeycombs with 20mm thick walls (No. 1 Piece)6 notch polystyrene hive reinforcing spacer, two for each hive - Dimensions: Inner L=23.2cm Outer L=27.3 cmFor items No. QI A41 and QI A77 Nucleus hives - QI M60 Honey super

Lateral reinforcement for beehive and honeycomb D.B. 6 polystyrene frames (No. 1 Piece) For polystyrene beehives with 20 mm thick walls For items No. QI A41 and QI A77 Nucleus hives - QI M60 honeycomb

Lateral reinforcement for beehive and honeycomb D.B. 6 polystyrene frames (No. 1 Piece) For polystyrene beehives with 20 mm thick walls For items No. QI A41 and QI A77 Nucleus hives - QI M60 honeycomb

Galvanized sheet metal door for polystyrene Beehive d.B. 6 favicomposed of base + 2-position open/closed slider

Galvanized sheet metal door for polystyrene Beehive d.B. 6 favicomposed of base + 2-position open/closed slider

Polystyrene frame lid and galvanized steel mesh for D.B. 6-frame BeehivesIdeal for transportation

Polystyrene frame lid and galvanized steel mesh for D.B. 6-frame BeehivesIdeal for transportation

Electro-welded galvanized sheet metal box ROOF for D.B. Nucleus hives 6 FAVI Dim .: 30 x 51.5 cm

Electro-welded galvanized sheet metal box ROOF for D.B. Nucleus hives 6 FAVI Dim .: 30 x 51.5 cm

Electro-welded box ROOF made of WHITE ENAMELED PLATE for 6-frame D.B. Beehives - Width= 30 cm x Length = 51.5 cm FIT FOR 6-frame POLYSTYRENE ROOF with wall thicknesses 2 and 2.5 cm

Electro-welded box ROOF made of WHITE ENAMELED PLATE for 6-frame D.B. Beehives - Width= 30 cm x Length = 51.5 cm FIT FOR 6-frame POLYSTYRENE ROOF with wall thicknesses 2 and 2.5 cm

PERFORATED ROOF to IMPROVE AREA DURING TRANSPORTFor 6-frame D.B. polystyrene Beehives with standard measurements 27.5 x 50.0 cm Inner light: 27.5 cm - length: 50 cmWith the side flaps slightly tilted inward, to help interlock and grip with polystyrene Beehives

PERFORATED ROOF to IMPROVE AREA DURING TRANSPORTFor 6-frame D.B. polystyrene Beehives with standard measurements 27.5 x 50.0 cm Inner light: 27.5 cm - length: 50 cmWith the side flaps slightly tilted inward, to help interlock and grip with polystyrene Beehives

WOODEN COVER WITH NET for transporting D.B. 6-frame 20-mm honeycombsInner light 28 cmIt has a frame that fits exactly into the Beehive to prevent bees from escaping.Above the net are 2 laths that allow the underlying core to be spaced from the upper core.

WOODEN COVER WITH NET for transporting D.B. 6-frame 20-mm honeycombsInner light 28 cmIt has a frame that fits exactly into the Beehive to prevent bees from escaping.Above the net are 2 laths that allow the underlying core to be spaced from the upper core.

10 mm plywood COVERWith galvanized stretched mesh for transporting D.B. 6-frame Beehives Inner dimensions cm 50.2 x 27.8 H 7.5

10 mm plywood COVERWith galvanized stretched mesh for transporting D.B. 6-frame Beehives Inner dimensions cm 50.2 x 27.8 H 7.5

Recyclable plastic ventilated transport lid for D.B. 6-frame polystyrene beehivesComplete with flaps, which allow the beehives to be stacked during transportSuitable for DADANT 6-frame polystyrene beehives, wall thickness 20 mmLid size: 49.5 x 27.5 cmInterior beehives size: 47 x 23.2 cm

Recyclable plastic ventilated transport lid for D.B. 6-frame polystyrene beehivesComplete with flaps, which allow the beehives to be stacked during transportSuitable for DADANT 6-frame polystyrene beehives, wall thickness 20 mmLid size: 49.5 x 27.5 cmInterior beehives size: 47 x 23.2 cm

EXCLUDE-Steel grid 27.3 x 50 cm for D.B. 6-frame Beehives

EXCLUDE-Steel grid 27.3 x 50 cm for D.B. 6-frame Beehives

Queen excluder for 6-frame D.B. Beehives made of 100% recyclable food-grade plastic Size: 49.2 x 27.0 cm - 172 g

Queen excluder for 6-frame D.B. Beehives made of 100% recyclable food-grade plastic Size: 49.2 x 27.0 cm - 172 g

Honey super for 6-frame Dadant Blatt Beehives made of painted wood without frames. Availability: - Wall thickness 2.5cm width 28.5cm (for polystyrene or wooden 28.5cm Beehives) with 5 or 6 notches (COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)

Honey super for 6-frame Dadant Blatt Beehives made of painted wood without frames. Availability: - Wall thickness 2.5cm width 28.5cm (for polystyrene or wooden 28.5cm Beehives) with 5 or 6 notches (COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)

WOODEN COVER WITH NET for transporting D.B. 6-frame 25-mm BeehivesIt has a frame that fits exactly into the Beehive to prevent bees from escaping.Above the net are 2 laths that allow the nucleus below to be spaced from the nucleus above.

WOODEN COVER WITH NET for transporting D.B. 6-frame 25-mm BeehivesIt has a frame that fits exactly into the Beehive to prevent bees from escaping.Above the net are 2 laths that allow the nucleus below to be spaced from the nucleus above.