€4,350.00Regular price-€450.00€4,800.00Price
Special Products
Featured Products
Subcategory
€21.00Price
Stainless steel uncapping scissorsUncapping is faster and more precise.It is used by pulling it, the cutting depth is adjustable. - length 20 cm - width 8.5 cm - plastic handle
€21.00Price
Stainless steel uncapping scissorsUncapping is faster and more precise.It is used by pulling it, the cutting depth is adjustable. - length 20 cm - width 8.5 cm - plastic handle
Stainless steel uncapping scissorsUncapping is faster and more precise.It is used by pulling it, the cutting depth is adjustable. - length 20 cm - width 8.5 cm - plastic handle
€21.00Price
€36.00Price
Yellow cotton beekeeper jumpsuit (MASK NOT INCLUDED) Sizes available : S-M-L-XL-XXL-XXXLComplete beekeeper jumpsuit, with front zipper for opening, for use with masks provided with elastic underarm fastenersMask to match: Square (Code FO 4210) and Round (Code FO 4230)
€36.00Price
Yellow cotton beekeeper jumpsuit (MASK NOT INCLUDED) Sizes available : S-M-L-XL-XXL-XXXLComplete beekeeper jumpsuit, with front zipper for opening, for use with masks provided with elastic underarm fastenersMask to match: Square (Code FO 4210) and Round (Code FO 4230)
Yellow cotton beekeeper jumpsuit (MASK NOT INCLUDED) Sizes available : S-M-L-XL-XXL-XXXLComplete beekeeper jumpsuit, with front zipper for opening, for use with masks provided with elastic underarm fastenersMask to match: Square (Code FO 4210) and Round (Code FO 4230)
€36.00Price
€14.90Price
"ACQUASTOP" water-resistant beekeeping gloves with elasticized sleeve. The extra-long knitted sleeve on the arms, with an elasticized hem at the bottom, allows them to fit completely over the suit or protective jacket.Sizes available : 7 (S) - 8 (M) - 9 (L) - 10 (XL)
€14.90Price
"ACQUASTOP" water-resistant beekeeping gloves with elasticized sleeve. The extra-long knitted sleeve on the arms, with an elasticized hem at the bottom, allows them to fit completely over the suit or protective jacket.Sizes available : 7 (S) - 8 (M) - 9 (L) - 10 (XL)
"ACQUASTOP" water-resistant beekeeping gloves with elasticized sleeve. The extra-long knitted sleeve on the arms, with an elasticized hem at the bottom, allows them to fit completely over the suit or protective jacket.Sizes available : 7 (S) - 8 (M) - 9 (L) - 10 (XL)
€14.90Price
€42.00Price
Compact cotton camisole with front zipper for full jacket opening and circular terry collar to attach round aluminum mesh mask detachable by elastic bandCuffs with elastic bandsRound mask includedSize available S-M-L-XL-XXL-XXXL Round mask replacement (FO 4230)
€42.00Price
Compact cotton camisole with front zipper for full jacket opening and circular terry collar to attach round aluminum mesh mask detachable by elastic bandCuffs with elastic bandsRound mask includedSize available S-M-L-XL-XXL-XXXL Round mask replacement (FO 4230)
Compact cotton camisole with front zipper for full jacket opening and circular terry collar to attach round aluminum mesh mask detachable by elastic bandCuffs with elastic bandsRound mask includedSize available S-M-L-XL-XXL-XXXL Round mask replacement (FO 4230)
€42.00Price
€28.00Price
APICALM pellet vegetable fuel for beekeeping smokers, 15 kg bagPellet vegetable fuel made from olive processing, ideal for abundant smoke. To use this type of fuel, the smoker must be complete with a cylindrical steel container
€28.00Price
APICALM pellet vegetable fuel for beekeeping smokers, 15 kg bagPellet vegetable fuel made from olive processing, ideal for abundant smoke. To use this type of fuel, the smoker must be complete with a cylindrical steel container
APICALM pellet vegetable fuel for beekeeping smokers, 15 kg bagPellet vegetable fuel made from olive processing, ideal for abundant smoke. To use this type of fuel, the smoker must be complete with a cylindrical steel container
€28.00Price
€9.50Price
Food-grade white plastic PE PROPOLIS NET - Height 50 cm - Thickness 1.3 mm- PRICE per mtRhomboidal Mesh Design: Each diamond-shaped mesh measures 3.4 x 3.2 mm, designed to effectively hold propolis Collection: Once the net is full, it can be removed and frozen for 12 to 24 hours. After hardening, the propolis can be easily removed by twisting the mesh, leaving no residue.
€9.50Price
Food-grade white plastic PE PROPOLIS NET - Height 50 cm - Thickness 1.3 mm- PRICE per mtRhomboidal Mesh Design: Each diamond-shaped mesh measures 3.4 x 3.2 mm, designed to effectively hold propolis Collection: Once the net is full, it can be removed and frozen for 12 to 24 hours. After hardening, the propolis can be easily removed by twisting the mesh, leaving no residue.
Food-grade white plastic PE PROPOLIS NET - Height 50 cm - Thickness 1.3 mm- PRICE per mtRhomboidal Mesh Design: Each diamond-shaped mesh measures 3.4 x 3.2 mm, designed to effectively hold propolis Collection: Once the net is full, it can be removed and frozen for 12 to 24 hours. After hardening, the propolis can be easily removed by twisting the mesh, leaving no residue.
€9.50Price
€0.90Price
Cardboard gift box for No. 1 1kg honey jar (780 ml) - Made of HODULATED CANNET series BROWN Size: 10 x 10 x h 15 cm SEE QUANTITY DISCOUNT
€0.90Price
Cardboard gift box for No. 1 1kg honey jar (780 ml) - Made of HODULATED CANNET series BROWN Size: 10 x 10 x h 15 cm SEE QUANTITY DISCOUNT
Cardboard gift box for No. 1 1kg honey jar (780 ml) - Made of HODULATED CANNET series BROWN Size: 10 x 10 x h 15 cm SEE QUANTITY DISCOUNT
€0.90Price
€0.47Price
CEE STANDARD glass jar 156 ml with TWIST-OFF CAPS T53 (diam. 53 mm) h= 85.5 mm - Diam. = 56.4 mm - weight = 100 g IN TERMOPACHS of 40 pieces
€0.47Price
CEE STANDARD glass jar 156 ml with TWIST-OFF CAPS T53 (diam. 53 mm) h= 85.5 mm - Diam. = 56.4 mm - weight = 100 g IN TERMOPACHS of 40 pieces
CEE STANDARD glass jar 156 ml with TWIST-OFF CAPS T53 (diam. 53 mm) h= 85.5 mm - Diam. = 56.4 mm - weight = 100 g IN TERMOPACHS of 40 pieces
€0.47Price
€0.42Price
GLASS CONTAINER for 50-mL yellow bottles - with SECURITY SEAL FOR INTEGRITY PACKAGE - PFP 18 BOTTLE PACK of 77 pieces
€0.42Price
GLASS CONTAINER for 50-mL yellow bottles - with SECURITY SEAL FOR INTEGRITY PACKAGE - PFP 18 BOTTLE PACK of 77 pieces
GLASS CONTAINER for 50-mL yellow bottles - with SECURITY SEAL FOR INTEGRITY PACKAGE - PFP 18 BOTTLE PACK of 77 pieces
€0.42Price
Queen marker flask YELLOW YELLOW:year 2017 2022 2027
€148.00Price
Queen marker flask YELLOW YELLOW:year 2017 2022 2027
€148.00Price
€148.00Price
SMALL TRAMOGGY STAINLESS STEEL FILTER - For Maturators from 50 to 100Kg diameter 310 mm, with 3 folding supports and nylon bag filter (Code QI S01/ES)
€148.00Price
SMALL TRAMOGGY STAINLESS STEEL FILTER - For Maturators from 50 to 100Kg diameter 310 mm, with 3 folding supports and nylon bag filter (Code QI S01/ES)
SMALL TRAMOGGY STAINLESS STEEL FILTER - For Maturators from 50 to 100Kg diameter 310 mm, with 3 folding supports and nylon bag filter (Code QI S01/ES)
€148.00Price
€0.30Price
Larva holder without dome - NICOT - DDTo be applied directly to the fixing block (HY G-0007)
€0.30Price
Larva holder without dome - NICOT - DDTo be applied directly to the fixing block (HY G-0007)
Larva holder without dome - NICOT - DDTo be applied directly to the fixing block (HY G-0007)
€0.30Price
This core consists of a nest, 3 small doors on three different sides of the nest. It has 3 feeder covers, 2 larger ones (same as those in Nucleus hive T2), while the middle one is smaller; they are all paraffined, with central chimney and with special closure for the feeding hole during transport. A masonite sheet is placed on top of the coverslips; as a closure there is an electro-welded roof covering both coverslips. A sheet metal separates the two compartments. The wooden bottom has a hole in the center covered with expanded metal sheet for ventilation. METHOD OF USE: You must open the frame and replace it with a frame inside the Beehive. Leave it long enough for your family to allow the brood to settle and transfer it to the Nucleus hive free work along with some bees. They, noting the absence of a queen bee, will make their own cell. For each frame you need to repeat the same procedure. At the end of the treatment you will have your 2 mini-nuclei with fertilized queen. Only recommendation: keep the Nucleus hive 3 km away from the apiary or closed 2 days.
€63.00Price
This core consists of a nest, 3 small doors on three different sides of the nest. It has 3 feeder covers, 2 larger ones (same as those in Nucleus hive T2), while the middle one is smaller; they are all paraffined, with central chimney and with special closure for the feeding hole during transport. A masonite sheet is placed on top of the coverslips; as a closure there is an electro-welded roof covering both coverslips. A sheet metal separates the two compartments. The wooden bottom has a hole in the center covered with expanded metal sheet for ventilation. METHOD OF USE: You must open the frame and replace it with a frame inside the Beehive. Leave it long enough for your family to allow the brood to settle and transfer it to the Nucleus hive free work along with some bees. They, noting the absence of a queen bee, will make their own cell. For each frame you need to repeat the same procedure. At the end of the treatment you will have your 2 mini-nuclei with fertilized queen. Only recommendation: keep the Nucleus hive 3 km away from the apiary or closed 2 days.
€63.00Price
€63.00Price
Nucleus hive for the production of Queen Bees with 3 compartments, type Free Work T3 Complete with 3 accordion frames Cod. PI 45/E (elongated has the same measurements as a nest frame)
€63.00Price
Nucleus hive for the production of Queen Bees with 3 compartments, type Free Work T3 Complete with 3 accordion frames Cod. PI 45/E (elongated has the same measurements as a nest frame)
Nucleus hive for the production of Queen Bees with 3 compartments, type Free Work T3 Complete with 3 accordion frames Cod. PI 45/E (elongated has the same measurements as a nest frame)
€63.00Price
€105.00Price
Nylon BASKET for Dadant B. radial honey extractor for 18 Honey super frames or 3 brood frames - Extractor diameter 620 mm - Shaft bushing diameter 16 mmNo. 3 additional cages not included (INOX QI G0 series) are required for brood frames
€105.00Price
Nylon BASKET for Dadant B. radial honey extractor for 18 Honey super frames or 3 brood frames - Extractor diameter 620 mm - Shaft bushing diameter 16 mmNo. 3 additional cages not included (INOX QI G0 series) are required for brood frames
Nylon BASKET for Dadant B. radial honey extractor for 18 Honey super frames or 3 brood frames - Extractor diameter 620 mm - Shaft bushing diameter 16 mmNo. 3 additional cages not included (INOX QI G0 series) are required for brood frames
€105.00Price
€480.00Price
STAINLESS STEEL BOTTLE for FOR HONEY DOSING MACHINE DANA 1000 Bees MATIC Holds 10 kg of honey Diameter 30 cm - Height 29 cm
€480.00Price
STAINLESS STEEL BOTTLE for FOR HONEY DOSING MACHINE DANA 1000 Bees MATIC Holds 10 kg of honey Diameter 30 cm - Height 29 cm
STAINLESS STEEL BOTTLE for FOR HONEY DOSING MACHINE DANA 1000 Bees MATIC Holds 10 kg of honey Diameter 30 cm - Height 29 cm
€480.00Price
L 75-150 cold mixer with turbo agitator for liquids- 400V- 1.5 Kw
€9,100.00Price
L 75-150 cold mixer with turbo agitator for liquids- 400V- 1.5 Kw
€9,100.00Price
€9,100.00Price
L 75-150 cold mixer with turbo agitator for liquids- 400V- 1.5 Kw
€9,100.00Price
L 75-150 cold mixer with turbo agitator for liquids- 400V- 1.5 Kw
L 75-150 cold mixer with turbo agitator for liquids- 400V- 1.5 Kw
€9,100.00Price
€75.00Price
18/10 stainless steel oil CONTAINER - Ø 373 mm - height 549 mm - opening 200 mm - 50 L Prepared for 1/2" tap (NOT INCLUDED) (Cod. QI R21) and (Cod.4F RUB1) Large top opening (Ø 200 mm) that facilitates filling and cleaning. Ideal for oil storage and for transporting oil, wine, liquor or water. OPTIONS:-TIG-welded: welded bottom that ensures better hygiene, provided with a plastic "bottom cover" that allows movements of the drum without damaging the bottom. Fully TIG-welded. -Crimped without welding.
€75.00Price
18/10 stainless steel oil CONTAINER - Ø 373 mm - height 549 mm - opening 200 mm - 50 L Prepared for 1/2" tap (NOT INCLUDED) (Cod. QI R21) and (Cod.4F RUB1) Large top opening (Ø 200 mm) that facilitates filling and cleaning. Ideal for oil storage and for transporting oil, wine, liquor or water. OPTIONS:-TIG-welded: welded bottom that ensures better hygiene, provided with a plastic "bottom cover" that allows movements of the drum without damaging the bottom. Fully TIG-welded. -Crimped without welding.
18/10 stainless steel oil CONTAINER - Ø 373 mm - height 549 mm - opening 200 mm - 50 L Prepared for 1/2" tap (NOT INCLUDED) (Cod. QI R21) and (Cod.4F RUB1) Large top opening (Ø 200 mm) that facilitates filling and cleaning. Ideal for oil storage and for transporting oil, wine, liquor or water. OPTIONS:-TIG-welded: welded bottom that ensures better hygiene, provided with a plastic "bottom cover" that allows movements of the drum without damaging the bottom. Fully TIG-welded. -Crimped without welding.
€75.00Price
€5.90Price
RUND CONICAL white plastic bucket - with LID pressure tight closure and safety tab - STEEL HANDLECarries 25 kg of honey
€5.90Price
RUND CONICAL white plastic bucket - with LID pressure tight closure and safety tab - STEEL HANDLECarries 25 kg of honey
RUND CONICAL white plastic bucket - with LID pressure tight closure and safety tab - STEEL HANDLECarries 25 kg of honey
€5.90Price
€9,800.00Price
PROFESSIONAL STAINLESS STEEL MATURATOR capacity of 5000 kg with 4 legs- TIG welds- total discharge- diameter 160 cm- height 300 cm Provision for 50 mm diameter TAP NOT INCLUDED
€9,800.00Price
PROFESSIONAL STAINLESS STEEL MATURATOR capacity of 5000 kg with 4 legs- TIG welds- total discharge- diameter 160 cm- height 300 cm Provision for 50 mm diameter TAP NOT INCLUDED
PROFESSIONAL STAINLESS STEEL MATURATOR capacity of 5000 kg with 4 legs- TIG welds- total discharge- diameter 160 cm- height 300 cm Provision for 50 mm diameter TAP NOT INCLUDED
€9,800.00Price
REVERSIBLE Extractor D.B. from 12 honeycomb nest or 24 honeycomb layent-Ø1300-0.75Kw-230V 1 mm thick stainless steel drum. flocked or satin-finished stainless steel finish(subject to availability). Full discharge, stainless steel reinforcement bands. Direct honey discharge without tap. 4 stainless steel legs. Double upper bar for fixing stainless steel shaft bearing. Stainless steel basket with loading capacity 12 layent 12 D.B. nest or 24 Honey super frames. 3 opening points at lid. 1.5Hp motor- housed under the drum(stainless steel motor mounts). Speed reducer applied to 'basket shaft. Electronic programming with membrane control panel. Motor lock. Safety locks at lids. Stainless steel electric square support(optional). Machine weight empty kg 175. Power supply 230V-1Kw.
€9,500.00Price
REVERSIBLE Extractor D.B. from 12 honeycomb nest or 24 honeycomb layent-Ø1300-0.75Kw-230V 1 mm thick stainless steel drum. flocked or satin-finished stainless steel finish(subject to availability). Full discharge, stainless steel reinforcement bands. Direct honey discharge without tap. 4 stainless steel legs. Double upper bar for fixing stainless steel shaft bearing. Stainless steel basket with loading capacity 12 layent 12 D.B. nest or 24 Honey super frames. 3 opening points at lid. 1.5Hp motor- housed under the drum(stainless steel motor mounts). Speed reducer applied to 'basket shaft. Electronic programming with membrane control panel. Motor lock. Safety locks at lids. Stainless steel electric square support(optional). Machine weight empty kg 175. Power supply 230V-1Kw.
€9,500.00Price
€9,500.00Price
REVERSIBLE Extractor D.B. from 12 brood or 24 honeycombs or 12 LAYENT frames- Ø 1300 mm - 0.75Kw -230V
€9,500.00Price
REVERSIBLE Extractor D.B. from 12 brood or 24 honeycombs or 12 LAYENT frames- Ø 1300 mm - 0.75Kw -230V
REVERSIBLE Extractor D.B. from 12 brood or 24 honeycombs or 12 LAYENT frames- Ø 1300 mm - 0.75Kw -230V
€9,500.00Price
€130.00Price
STAINLESS STEEL MATURATOR capacity 100 kg of honey with TIG welds - Diameter 37.00 cm - Height 69.00 cm - Nylon cut-through tap diam. 40 mm (QI R11)TRANSPARENT PLEXIGLAS COVER (QI C119)OPTIONS: No. 2 stainless steel lifting handles
€130.00Price
STAINLESS STEEL MATURATOR capacity 100 kg of honey with TIG welds - Diameter 37.00 cm - Height 69.00 cm - Nylon cut-through tap diam. 40 mm (QI R11)TRANSPARENT PLEXIGLAS COVER (QI C119)OPTIONS: No. 2 stainless steel lifting handles
STAINLESS STEEL MATURATOR capacity 100 kg of honey with TIG welds - Diameter 37.00 cm - Height 69.00 cm - Nylon cut-through tap diam. 40 mm (QI R11)TRANSPARENT PLEXIGLAS COVER (QI C119)OPTIONS: No. 2 stainless steel lifting handles
€130.00Price
General CharacteristicsInox volumetric rotary pump with flexible impeller, self-priming ( up to 6 mt.), reversible, low-speed, available in one-piece (coaxial) version, with 1- and 2-speed pulley reduction, with mechanical speed variator, with built-in inverter.The trolley/base, fittings and pump body are made of AISI 304 stainless steel.The "standard" impeller is made of non-toxic natural rubber, or on request in neoprene,nitrile, EPDM, silicone. The standard mechanical seal is ceramic-graphite-NBR, upon request vidia-vidia-NBR or vidia-vidia-viton. Food industry: transfer of delicate liquids, including those with suspended bodies, and of different viscosities without emulsifying : wine, must, must and destemmed grapes, beer, fruit juice and pulp, honey, jam, liquid sugar, glucose, milk, butter, yoghurt, eggs, oil, tomato sauce.
€1,880.00Price
General CharacteristicsInox volumetric rotary pump with flexible impeller, self-priming ( up to 6 mt.), reversible, low-speed, available in one-piece (coaxial) version, with 1- and 2-speed pulley reduction, with mechanical speed variator, with built-in inverter.The trolley/base, fittings and pump body are made of AISI 304 stainless steel.The "standard" impeller is made of non-toxic natural rubber, or on request in neoprene,nitrile, EPDM, silicone. The standard mechanical seal is ceramic-graphite-NBR, upon request vidia-vidia-NBR or vidia-vidia-viton. Food industry: transfer of delicate liquids, including those with suspended bodies, and of different viscosities without emulsifying : wine, must, must and destemmed grapes, beer, fruit juice and pulp, honey, jam, liquid sugar, glucose, milk, butter, yoghurt, eggs, oil, tomato sauce.
€1,880.00Price
€1,880.00Price
Low RPM ROTARY VOLUMETRIC PUMP FOR HONEY AUTOADESCENT stainless steel pump with FLEXIBLE rubber impeller with pulley reduction on a wheeled trolley. This model, with very low RPM (300rpm), and with the NR natural rubber impeller, is particularly suitable for HONEY. Single-phase 230V/50Hz power supply - 1.5 KW - 300 rpm. - Weight 38 Kg - Connection 40 mm 1"1/2 Supply includes inlet and outlet garolla connections Max. head: H= 16 mt Max. flow rate: 40 L/min.
€1,880.00Price
Low RPM ROTARY VOLUMETRIC PUMP FOR HONEY AUTOADESCENT stainless steel pump with FLEXIBLE rubber impeller with pulley reduction on a wheeled trolley. This model, with very low RPM (300rpm), and with the NR natural rubber impeller, is particularly suitable for HONEY. Single-phase 230V/50Hz power supply - 1.5 KW - 300 rpm. - Weight 38 Kg - Connection 40 mm 1"1/2 Supply includes inlet and outlet garolla connections Max. head: H= 16 mt Max. flow rate: 40 L/min.
Low RPM ROTARY VOLUMETRIC PUMP FOR HONEY AUTOADESCENT stainless steel pump with FLEXIBLE rubber impeller with pulley reduction on a wheeled trolley. This model, with very low RPM (300rpm), and with the NR natural rubber impeller, is particularly suitable for HONEY. Single-phase 230V/50Hz power supply - 1.5 KW - 300 rpm. - Weight 38 Kg - Connection 40 mm 1"1/2 Supply includes inlet and outlet garolla connections Max. head: H= 16 mt Max. flow rate: 40 L/min.
€1,880.00Price
€72.00Price
MANUAL TRANSMISSION for Extractor with DISCONNECTOR and BRAKE (CE MARK)-ROTATION in ONE WAY SET with : CRANK HANDLE WITH BAR FOR EXTRACTOR DIAM. 370 mm STEEL 9-PRIMES GEARS suitable for 16 mm shaft coupling ( SHAFT SHAFT NOT INCLUDED)
€72.00Price
MANUAL TRANSMISSION for Extractor with DISCONNECTOR and BRAKE (CE MARK)-ROTATION in ONE WAY SET with : CRANK HANDLE WITH BAR FOR EXTRACTOR DIAM. 370 mm STEEL 9-PRIMES GEARS suitable for 16 mm shaft coupling ( SHAFT SHAFT NOT INCLUDED)
MANUAL TRANSMISSION for Extractor with DISCONNECTOR and BRAKE (CE MARK)-ROTATION in ONE WAY SET with : CRANK HANDLE WITH BAR FOR EXTRACTOR DIAM. 370 mm STEEL 9-PRIMES GEARS suitable for 16 mm shaft coupling ( SHAFT SHAFT NOT INCLUDED)
€72.00Price
€360.00Price
LANGSTROTH MANUAL TANGENTIAL Extractor for 4 combs - diameter 525 mm - with stainless steel basket (Code QI C55)
€360.00Price
LANGSTROTH MANUAL TANGENTIAL Extractor for 4 combs - diameter 525 mm - with stainless steel basket (Code QI C55)
LANGSTROTH MANUAL TANGENTIAL Extractor for 4 combs - diameter 525 mm - with stainless steel basket (Code QI C55)
€360.00Price
EXTRACTOR SERIES 2008-27/3 RADIAL EXTRACTOR FOR 27 HONEY super FAVI or 3 NEST Tangential FAVI.( WITH THE USE OF ADDITIONAL CAGES NOT INCLUDED ) OR 15 FAVI LANGSTROTH- with ART. QI S86 120W-230V motor. IS A NEW SERIES OF EQUIPMENT DESIGNED FOR "MONOBLOCK" HONEY EXTRACTION. In one machine, you have everything you need in a honey extraction room, uncapping ,operculum treatment , accumulation of uncapped combs , honey extraction and decanting of honey. The most obvious advantages are: smaller footprint, convenience in processing steps, with higher yield and reduction of 'inevitable dripping of honey on the floor. The 2008 series is produced in different versions from the hobbyist beekeeper to the professional. The model "2008/45 professional series , the top of the range comes with: a large uncapping bench ,complete with an uncapping machine with automatic comb unloader and accumulator, electronically controlled centrifuge for opercula, an uncapped frame collector , an extractor for 45 frames D.B. from Honey super or 20 from nest controlled by a very sophisticated software capable of managing the extraction cycle independently , a decanting tank with filter that can be heated , pump arrangement for transferring honey into containers .
€2,500.00Price
EXTRACTOR SERIES 2008-27/3 RADIAL EXTRACTOR FOR 27 HONEY super FAVI or 3 NEST Tangential FAVI.( WITH THE USE OF ADDITIONAL CAGES NOT INCLUDED ) OR 15 FAVI LANGSTROTH- with ART. QI S86 120W-230V motor. IS A NEW SERIES OF EQUIPMENT DESIGNED FOR "MONOBLOCK" HONEY EXTRACTION. In one machine, you have everything you need in a honey extraction room, uncapping ,operculum treatment , accumulation of uncapped combs , honey extraction and decanting of honey. The most obvious advantages are: smaller footprint, convenience in processing steps, with higher yield and reduction of 'inevitable dripping of honey on the floor. The 2008 series is produced in different versions from the hobbyist beekeeper to the professional. The model "2008/45 professional series , the top of the range comes with: a large uncapping bench ,complete with an uncapping machine with automatic comb unloader and accumulator, electronically controlled centrifuge for opercula, an uncapped frame collector , an extractor for 45 frames D.B. from Honey super or 20 from nest controlled by a very sophisticated software capable of managing the extraction cycle independently , a decanting tank with filter that can be heated , pump arrangement for transferring honey into containers .
€2,500.00Price
€2,500.00Price
EXTRACTOR SERIES 2008-27/3 RADIAL EXTRACTOR FOR 27 HONEY super FAVILS or 3 TANGENTIAL NEST FAVILS( WITH THE USE OF ADDITIONAL CAGES NOT INCLUDED ) OR 15 LANGSTROTH FAVILS- with ART. QI S86 120W-230V motor.
€2,500.00Price
EXTRACTOR SERIES 2008-27/3 RADIAL EXTRACTOR FOR 27 HONEY super FAVILS or 3 TANGENTIAL NEST FAVILS( WITH THE USE OF ADDITIONAL CAGES NOT INCLUDED ) OR 15 LANGSTROTH FAVILS- with ART. QI S86 120W-230V motor.
EXTRACTOR SERIES 2008-27/3 RADIAL EXTRACTOR FOR 27 HONEY super FAVILS or 3 TANGENTIAL NEST FAVILS( WITH THE USE OF ADDITIONAL CAGES NOT INCLUDED ) OR 15 LANGSTROTH FAVILS- with ART. QI S86 120W-230V motor.
€2,500.00Price
€255.00Price
Wax or WINE OPERATOR - Ø 25 cm - Ratchet with 1-speed mechanical movement - Pressed steel basin - High-strength steel screw - Beech wood staves fixed with through bolts - equipped with 6 caps and 2 crescents. Dimensions : Cage 25 x 40 cm - capacity 20 L Screw diameter 28 mm Weight 22 Kg MADE IN ITALY
€255.00Price
Wax or WINE OPERATOR - Ø 25 cm - Ratchet with 1-speed mechanical movement - Pressed steel basin - High-strength steel screw - Beech wood staves fixed with through bolts - equipped with 6 caps and 2 crescents. Dimensions : Cage 25 x 40 cm - capacity 20 L Screw diameter 28 mm Weight 22 Kg MADE IN ITALY
Wax or WINE OPERATOR - Ø 25 cm - Ratchet with 1-speed mechanical movement - Pressed steel basin - High-strength steel screw - Beech wood staves fixed with through bolts - equipped with 6 caps and 2 crescents. Dimensions : Cage 25 x 40 cm - capacity 20 L Screw diameter 28 mm Weight 22 Kg MADE IN ITALY
€255.00Price
€2,750.00Price
CERA or SEPARATOR CERA/HONEY SEPARATOR stainless steel insulated double chamber BOILER FROM 150 Kg - Alim. 230V-1500W double-chamber insulated stainless steel complete with electrical panel with control thermostat
€2,750.00Price
CERA or SEPARATOR CERA/HONEY SEPARATOR stainless steel insulated double chamber BOILER FROM 150 Kg - Alim. 230V-1500W double-chamber insulated stainless steel complete with electrical panel with control thermostat
CERA or SEPARATOR CERA/HONEY SEPARATOR stainless steel insulated double chamber BOILER FROM 150 Kg - Alim. 230V-1500W double-chamber insulated stainless steel complete with electrical panel with control thermostat
€2,750.00Price
€7.80Price
D.B. Honey super plastic pocket nourisher Screwed with 6 screws, anti-drowning net, non-slip walls Size: 43.5 x 12.5 cm - Capacity about 1 L
€7.80Price
D.B. Honey super plastic pocket nourisher Screwed with 6 screws, anti-drowning net, non-slip walls Size: 43.5 x 12.5 cm - Capacity about 1 L
D.B. Honey super plastic pocket nourisher Screwed with 6 screws, anti-drowning net, non-slip walls Size: 43.5 x 12.5 cm - Capacity about 1 L
€7.80Price
€1.30Price
Replacement LID for 2-liter feeder (Code QI N03)
Replacement LID for 2-liter feeder (Code QI N03)
€1.30Price
€5.40Price
Pre-colored high-density polystyrene DIAFRAM for insertion into D.B. nesting frame (new or used , no wires) 30 mm thickness - Width 415 mm x Height 265 mm
€5.40Price
Pre-colored high-density polystyrene DIAFRAM for insertion into D.B. nesting frame (new or used , no wires) 30 mm thickness - Width 415 mm x Height 265 mm
Pre-colored high-density polystyrene DIAFRAM for insertion into D.B. nesting frame (new or used , no wires) 30 mm thickness - Width 415 mm x Height 265 mm
€5.40Price
€16.50Price
APISCAMPO on a 50 x 50 cm wooden board for D.B. 12-frame Beehives with ascending valve and EIGHT-WAY Bee escape disc (Code FO 2110)
€16.50Price
APISCAMPO on a 50 x 50 cm wooden board for D.B. 12-frame Beehives with ascending valve and EIGHT-WAY Bee escape disc (Code FO 2110)
APISCAMPO on a 50 x 50 cm wooden board for D.B. 12-frame Beehives with ascending valve and EIGHT-WAY Bee escape disc (Code FO 2110)
€16.50Price
€3.00Price
Wood screw - galvanized steel - 4.0 x 40/26 mm - Length 40 mm - Half thread - countersunk flat head - TORX TX15 screwdriver socket For Beehives and Honey super bottom and wall assembly (Conf. box of 100 pcs.)
€3.00Price
Wood screw - galvanized steel - 4.0 x 40/26 mm - Length 40 mm - Half thread - countersunk flat head - TORX TX15 screwdriver socket For Beehives and Honey super bottom and wall assembly (Conf. box of 100 pcs.)
Wood screw - galvanized steel - 4.0 x 40/26 mm - Length 40 mm - Half thread - countersunk flat head - TORX TX15 screwdriver socket For Beehives and Honey super bottom and wall assembly (Conf. box of 100 pcs.)
€3.00Price
Helmet for beekeeper, light and ventilated, washable, size adjustable from inside
€19.00Price
Helmet for beekeeper, light and ventilated, washable, size adjustable from inside
€19.00Price
€19.00Price
Lightweight practical beekeeper helmet for use with masks that do not have a hat (Art. QI M40 or QI M19)
€19.00Price
Lightweight practical beekeeper helmet for use with masks that do not have a hat (Art. QI M40 or QI M19)
Lightweight practical beekeeper helmet for use with masks that do not have a hat (Art. QI M40 or QI M19)
€19.00Price
- New
€3.50Price
Small smooth beeswax-based candleDiameter: 3.5 cmHeight: 5.5 cm-Weight: 56 gMADE IN ITALY
- New
€3.50Price
Small smooth beeswax-based candleDiameter: 3.5 cmHeight: 5.5 cm-Weight: 56 gMADE IN ITALY
- New
Small smooth beeswax-based candleDiameter: 3.5 cmHeight: 5.5 cm-Weight: 56 gMADE IN ITALY
€3.50Price
€23.00Price
Compact cotton camisole with front zipper for full jacket opening and circular terry collar for attaching the square aluminum mesh mask detachable by elastic band Cuffs with elastic bands Sizes available S-M-L-XL-XXL-XXXL Uses with:square mask (Code FO 4210)round mask (FO 4220)
€23.00Price
Compact cotton camisole with front zipper for full jacket opening and circular terry collar for attaching the square aluminum mesh mask detachable by elastic band Cuffs with elastic bands Sizes available S-M-L-XL-XXL-XXXL Uses with:square mask (Code FO 4210)round mask (FO 4220)
Compact cotton camisole with front zipper for full jacket opening and circular terry collar for attaching the square aluminum mesh mask detachable by elastic band Cuffs with elastic bands Sizes available S-M-L-XL-XXL-XXXL Uses with:square mask (Code FO 4210)round mask (FO 4220)
€23.00Price
€139.00Price
STAINLESS STEEL MATURATOR capacity 100 kg of honey with TIG welded - Diameter 37 cm - Height 69 cm TRANSPARENT PLEXIGLAS COVER (QI C119)Maturator with threaded ferrule for 40 mm diameter screw-cut tap attachment with choice of:- Plastic/Nylon tap (QI R05)- Chrome steel tap (QI R03)- Stainless steel tap (LA 6370)OPTIONS: No. 2 stainless steel lifting handles
€139.00Price
STAINLESS STEEL MATURATOR capacity 100 kg of honey with TIG welded - Diameter 37 cm - Height 69 cm TRANSPARENT PLEXIGLAS COVER (QI C119)Maturator with threaded ferrule for 40 mm diameter screw-cut tap attachment with choice of:- Plastic/Nylon tap (QI R05)- Chrome steel tap (QI R03)- Stainless steel tap (LA 6370)OPTIONS: No. 2 stainless steel lifting handles
STAINLESS STEEL MATURATOR capacity 100 kg of honey with TIG welded - Diameter 37 cm - Height 69 cm TRANSPARENT PLEXIGLAS COVER (QI C119)Maturator with threaded ferrule for 40 mm diameter screw-cut tap attachment with choice of:- Plastic/Nylon tap (QI R05)- Chrome steel tap (QI R03)- Stainless steel tap (LA 6370)OPTIONS: No. 2 stainless steel lifting handles
€139.00Price
€153.00Price
CAP twist-off RTS-RTO TO 70 (diam. 70 mm) ENAMELLED GREEN for 500 g honey jar -390 ml EDGE with notches : height = 10 mm ADAPTED TO HOT PASTEURIZATION PROCESSES WITH UNDER VACUUM SAFETY BUTTON Color white Box of 1190 pieces
€153.00Price
CAP twist-off RTS-RTO TO 70 (diam. 70 mm) ENAMELLED GREEN for 500 g honey jar -390 ml EDGE with notches : height = 10 mm ADAPTED TO HOT PASTEURIZATION PROCESSES WITH UNDER VACUUM SAFETY BUTTON Color white Box of 1190 pieces
CAP twist-off RTS-RTO TO 70 (diam. 70 mm) ENAMELLED GREEN for 500 g honey jar -390 ml EDGE with notches : height = 10 mm ADAPTED TO HOT PASTEURIZATION PROCESSES WITH UNDER VACUUM SAFETY BUTTON Color white Box of 1190 pieces
€153.00Price
"CANDYPITA," is a mixture of sugars (sucrose, glucose and fructose) and invert sugar syrup, 100% beetIt is used in bee feeding year-round.Organoleptic properties: light to coffee color, characteristic flavor and odorMethod of use: the product is fed through the coverletDosage: one pouch per household Packaging: pvc pouches 1 kg or 2 kg box 16 kg (16 pouches 1 kg or 8 pouches 2 kg) Caution: Store in a cool, dry placeShelf life: preferably within 24 months from date of production
€3.95Price
"CANDYPITA," is a mixture of sugars (sucrose, glucose and fructose) and invert sugar syrup, 100% beetIt is used in bee feeding year-round.Organoleptic properties: light to coffee color, characteristic flavor and odorMethod of use: the product is fed through the coverletDosage: one pouch per household Packaging: pvc pouches 1 kg or 2 kg box 16 kg (16 pouches 1 kg or 8 pouches 2 kg) Caution: Store in a cool, dry placeShelf life: preferably within 24 months from date of production
€3.95Price
€3.95Price
CANDYPITA candied paste Complementary feed for bees 100% from BARBABIETOLA- Made only with sugars extracted from Beet, contains no starches, nor other sugars - 2 kg packageComposition : See attached data sheet
€3.95Price
CANDYPITA candied paste Complementary feed for bees 100% from BARBABIETOLA- Made only with sugars extracted from Beet, contains no starches, nor other sugars - 2 kg packageComposition : See attached data sheet
CANDYPITA candied paste Complementary feed for bees 100% from BARBABIETOLA- Made only with sugars extracted from Beet, contains no starches, nor other sugars - 2 kg packageComposition : See attached data sheet
€3.95Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€15.50Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€15.50Price
€15.50Price
Mold height: 50 mm - Wick: 3 mm - Wax weight : 15 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€15.50Price
Mold height: 50 mm - Wick: 3 mm - Wax weight : 15 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Mold height: 50 mm - Wick: 3 mm - Wax weight : 15 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€15.50Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€35.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€35.80Price
€35.80Price
Mold height: 50mm diameter 60mm - wick 1.5mm - Wax weight 80g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€35.80Price
Mold height: 50mm diameter 60mm - wick 1.5mm - Wax weight 80g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Mold height: 50mm diameter 60mm - wick 1.5mm - Wax weight 80g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€35.80Price
€32.00Price
Stainless steel lid for plastic table uncapping bench Dim: 60x40 cm
€32.00Price
Stainless steel lid for plastic table uncapping bench Dim: 60x40 cm
Stainless steel lid for plastic table uncapping bench Dim: 60x40 cm
€32.00Price
- The stainless steel cage is laser-cut and designed to hold 42 Dadant super Honey super frames.- The stainless steel vessel is Ø 990 mm in diameter, the top edge is rolled to achieve greater axial rigidity, and the bottom has a special double taper shape that collects honey towards the spigot.Ø 50 mm stainless steel spigot.The AIRONE Professional Honey extractor is designed to last and to ensure reliability and stability.The vat and cage are made of stainless steel, as required by the regulations of materials in contact with honey.No limit to the number of frames to be extracted, Lega honey extractors will accompany you over time, as only a quality product can do.The honey extractor is MADE IN ITALY, which means that it is designed and manufactured inside the Lega factory, with all the experience and quality that has always qualified us. ADVANTAGES:- Professional use- Programmable with 6 working stages- Food grade stainless steel AISI 304- CE marking- Made in Italy- Stability and strength thanks to steel legs- Easy to clean- Easy to use- Total discharge TECHNICAL DATA:Material Vat: Stainless SteelCage Material: Stainless SteelDiameter of vat: Ø 99cmCage: radialMaximum rotation speed: 400 rpmType of frames: Dadant Honey super/Dadant Nest/Langstroth/Zander Capacity: 42 frames Dadant honeycomb18 frames Dadant nest42 frames Langstroth42 frames Zander
€5,380.00Price
- The stainless steel cage is laser-cut and designed to hold 42 Dadant super Honey super frames.- The stainless steel vessel is Ø 990 mm in diameter, the top edge is rolled to achieve greater axial rigidity, and the bottom has a special double taper shape that collects honey towards the spigot.Ø 50 mm stainless steel spigot.The AIRONE Professional Honey extractor is designed to last and to ensure reliability and stability.The vat and cage are made of stainless steel, as required by the regulations of materials in contact with honey.No limit to the number of frames to be extracted, Lega honey extractors will accompany you over time, as only a quality product can do.The honey extractor is MADE IN ITALY, which means that it is designed and manufactured inside the Lega factory, with all the experience and quality that has always qualified us. ADVANTAGES:- Professional use- Programmable with 6 working stages- Food grade stainless steel AISI 304- CE marking- Made in Italy- Stability and strength thanks to steel legs- Easy to clean- Easy to use- Total discharge TECHNICAL DATA:Material Vat: Stainless SteelCage Material: Stainless SteelDiameter of vat: Ø 99cmCage: radialMaximum rotation speed: 400 rpmType of frames: Dadant Honey super/Dadant Nest/Langstroth/Zander Capacity: 42 frames Dadant honeycomb18 frames Dadant nest42 frames Langstroth42 frames Zander
€5,380.00Price
€5,380.00Price
- Three-phase 1.3 kW electric motor powered single-phase, with integrated inverter in the lower area of the honey extractor.- Small-sized low-voltage (24V) control panel also complies with ULCSA American regulations.- Side control panel placement on the bar for better accessibility.- In addition to the functionality of the previous system, which remains unchanged, the possibility of having a user-programmable cycle of up to 6 working phases has been added, in which the rotation speed of the cage and its direction of rotation (clockwise/counterclockwise) can be set for each. The total cycle time set is automatically divided into equal parts for each phase that make up the working cycle.
€5,380.00Price
- Three-phase 1.3 kW electric motor powered single-phase, with integrated inverter in the lower area of the honey extractor.- Small-sized low-voltage (24V) control panel also complies with ULCSA American regulations.- Side control panel placement on the bar for better accessibility.- In addition to the functionality of the previous system, which remains unchanged, the possibility of having a user-programmable cycle of up to 6 working phases has been added, in which the rotation speed of the cage and its direction of rotation (clockwise/counterclockwise) can be set for each. The total cycle time set is automatically divided into equal parts for each phase that make up the working cycle.
- Three-phase 1.3 kW electric motor powered single-phase, with integrated inverter in the lower area of the honey extractor.- Small-sized low-voltage (24V) control panel also complies with ULCSA American regulations.- Side control panel placement on the bar for better accessibility.- In addition to the functionality of the previous system, which remains unchanged, the possibility of having a user-programmable cycle of up to 6 working phases has been added, in which the rotation speed of the cage and its direction of rotation (clockwise/counterclockwise) can be set for each. The total cycle time set is automatically divided into equal parts for each phase that make up the working cycle.
€5,380.00Price
**MACHINE MANUFACTURED FOR DADANT BLATT FRAMES. UPON REQUEST, UPON RECEIPT OF MEASUREMENTS IT CAN ALSO BE BUILT FOR OTHER FRAME SIZES. The knives are heated by means of a hot water heating and recycling unit (included in the machine) and it is possible to adjust the temperature of the knives by means of a special thermostat. The knives also work inside the wooden frame of the honeycombs and thus can uncapping even unfilled frames. Adjustment of the knives is quick and easy via a lever on the side of the uncapping machine that allows the passage between the knives to be tightened or widened. Manually introduced combs are guided and inserted, automatically between the blades in order to achieve smooth and systematic uncapping on both sides.
€6,180.00Price
**MACHINE MANUFACTURED FOR DADANT BLATT FRAMES. UPON REQUEST, UPON RECEIPT OF MEASUREMENTS IT CAN ALSO BE BUILT FOR OTHER FRAME SIZES. The knives are heated by means of a hot water heating and recycling unit (included in the machine) and it is possible to adjust the temperature of the knives by means of a special thermostat. The knives also work inside the wooden frame of the honeycombs and thus can uncapping even unfilled frames. Adjustment of the knives is quick and easy via a lever on the side of the uncapping machine that allows the passage between the knives to be tightened or widened. Manually introduced combs are guided and inserted, automatically between the blades in order to achieve smooth and systematic uncapping on both sides.
€6,180.00Price
€6,180.00Price
Uncapping machine (GN 170K) machine only without optional The "Giordan" heated vibrating knife uncapping machine is a professional machine that replaces the manual uncapping procedure. The machine is made entirely of AISI 304 stainless steel and works by guided passage of the frames inside two water-heated vibrating knives that allow for precise and optimal cutting of the operculum. With the uncapping machine, the opercula are not crumbled but cut, as with the use of a manual knife. With the addition of the double blade kit, there is no need to go over the frames again after the uncapping process. Uncapping capacity: approximately 11 frames/minute. Knife temperature: via thermostat from 30° C to 90° C. Power supply: 220 V Absorption: 2.8 KW 13.5 A DIM: Width 94 cm x Length 61.5 cm x Height 85 cm
€6,180.00Price
Uncapping machine (GN 170K) machine only without optional The "Giordan" heated vibrating knife uncapping machine is a professional machine that replaces the manual uncapping procedure. The machine is made entirely of AISI 304 stainless steel and works by guided passage of the frames inside two water-heated vibrating knives that allow for precise and optimal cutting of the operculum. With the uncapping machine, the opercula are not crumbled but cut, as with the use of a manual knife. With the addition of the double blade kit, there is no need to go over the frames again after the uncapping process. Uncapping capacity: approximately 11 frames/minute. Knife temperature: via thermostat from 30° C to 90° C. Power supply: 220 V Absorption: 2.8 KW 13.5 A DIM: Width 94 cm x Length 61.5 cm x Height 85 cm
Uncapping machine (GN 170K) machine only without optional The "Giordan" heated vibrating knife uncapping machine is a professional machine that replaces the manual uncapping procedure. The machine is made entirely of AISI 304 stainless steel and works by guided passage of the frames inside two water-heated vibrating knives that allow for precise and optimal cutting of the operculum. With the uncapping machine, the opercula are not crumbled but cut, as with the use of a manual knife. With the addition of the double blade kit, there is no need to go over the frames again after the uncapping process. Uncapping capacity: approximately 11 frames/minute. Knife temperature: via thermostat from 30° C to 90° C. Power supply: 220 V Absorption: 2.8 KW 13.5 A DIM: Width 94 cm x Length 61.5 cm x Height 85 cm
€6,180.00Price
€0.94Price
SQUEEZER KEOP food-grade plastic 350 ml dispenser for 500 g of HONEY - Mouth diameter 31 mm Screw cap dispenser BRONZE color (Code BC 03 ORA) DISPENSER equipped with flip-flop screw cap with ANTI-GOATING silicone valve and safety inner liner (LINER) Italian and European made material with food certification.
€0.94Price
SQUEEZER KEOP food-grade plastic 350 ml dispenser for 500 g of HONEY - Mouth diameter 31 mm Screw cap dispenser BRONZE color (Code BC 03 ORA) DISPENSER equipped with flip-flop screw cap with ANTI-GOATING silicone valve and safety inner liner (LINER) Italian and European made material with food certification.
SQUEEZER KEOP food-grade plastic 350 ml dispenser for 500 g of HONEY - Mouth diameter 31 mm Screw cap dispenser BRONZE color (Code BC 03 ORA) DISPENSER equipped with flip-flop screw cap with ANTI-GOATING silicone valve and safety inner liner (LINER) Italian and European made material with food certification.
€0.94Price
€153.00Price
RTS-RTO TO 70 twist-off CAPSULE (diam. 70 mm) for 500 g honey jar - 390 ml smooth EDGE with notches: height = 10 mm SUITABLE FOR HOT STERILIZATION PROCESSES WITH SAFETY UNDER VACUUM BUTTON COLOR : SILVER Box of 1190 pieces
€153.00Price
RTS-RTO TO 70 twist-off CAPSULE (diam. 70 mm) for 500 g honey jar - 390 ml smooth EDGE with notches: height = 10 mm SUITABLE FOR HOT STERILIZATION PROCESSES WITH SAFETY UNDER VACUUM BUTTON COLOR : SILVER Box of 1190 pieces
RTS-RTO TO 70 twist-off CAPSULE (diam. 70 mm) for 500 g honey jar - 390 ml smooth EDGE with notches: height = 10 mm SUITABLE FOR HOT STERILIZATION PROCESSES WITH SAFETY UNDER VACUUM BUTTON COLOR : SILVER Box of 1190 pieces
€153.00Price
€1.70Price
Additional plastic frame for Fertilization Beehive 'LYSON' (Code HY A0045)
€1.70Price
Additional plastic frame for Fertilization Beehive 'LYSON' (Code HY A0045)
Additional plastic frame for Fertilization Beehive 'LYSON' (Code HY A0045)
€1.70Price
€475.00Price
Langstroth Manual Tangential Extractor for 4 honeycombs - diameter 620 mm - Nylon shear tap diam. 40 mm Basket (Code QI C116) -height 46 cm
€475.00Price
Langstroth Manual Tangential Extractor for 4 honeycombs - diameter 620 mm - Nylon shear tap diam. 40 mm Basket (Code QI C116) -height 46 cm
Langstroth Manual Tangential Extractor for 4 honeycombs - diameter 620 mm - Nylon shear tap diam. 40 mm Basket (Code QI C116) -height 46 cm
€475.00Price
€0.45Price
YELLOW GLASS FLACON : 5 ml - DIAM. 34 mm - h = 73.2 mm MOUTH PFP18 MOUTH PFP 18 RASO CONTAINER WHITE PLASTIC CLOSURE CAPS -Mouth PFP 18- With safety seal CHILD-PROFF "SAVEBABY" PACKAGE in thermopack of 228 pieces
€0.45Price
YELLOW GLASS FLACON : 5 ml - DIAM. 34 mm - h = 73.2 mm MOUTH PFP18 MOUTH PFP 18 RASO CONTAINER WHITE PLASTIC CLOSURE CAPS -Mouth PFP 18- With safety seal CHILD-PROFF "SAVEBABY" PACKAGE in thermopack of 228 pieces
YELLOW GLASS FLACON : 5 ml - DIAM. 34 mm - h = 73.2 mm MOUTH PFP18 MOUTH PFP 18 RASO CONTAINER WHITE PLASTIC CLOSURE CAPS -Mouth PFP 18- With safety seal CHILD-PROFF "SAVEBABY" PACKAGE in thermopack of 228 pieces
€0.45Price
€190.00Price
CAP DEEP H14 TO 58 for 212 ml and 314 ml PLUS jar COLORS AVAILABLE: GOLD - SILVER diam. 58 mm - H = 14 mm BOX OF 1100 PIECES
€190.00Price
CAP DEEP H14 TO 58 for 212 ml and 314 ml PLUS jar COLORS AVAILABLE: GOLD - SILVER diam. 58 mm - H = 14 mm BOX OF 1100 PIECES
CAP DEEP H14 TO 58 for 212 ml and 314 ml PLUS jar COLORS AVAILABLE: GOLD - SILVER diam. 58 mm - H = 14 mm BOX OF 1100 PIECES
€190.00Price
€12.00Price
Flexible silicone soap moldWeight: 0.04 kgSize: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
€12.00Price
Flexible silicone soap moldWeight: 0.04 kgSize: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
Flexible silicone soap moldWeight: 0.04 kgSize: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
€12.00Price
€5.50Price
Polystyrene plate for side walls Nucleus hive 6-frame D.B. swarm holder (PI ARN/S Code) Size: 476 x 280 x 22 mm
€5.50Price
Polystyrene plate for side walls Nucleus hive 6-frame D.B. swarm holder (PI ARN/S Code) Size: 476 x 280 x 22 mm
Polystyrene plate for side walls Nucleus hive 6-frame D.B. swarm holder (PI ARN/S Code) Size: 476 x 280 x 22 mm
€5.50Price
Beehives D.B. 8 FAVI STANDARD with fixed anti-varroa net bottom Nest-cover with mounted 4-position disc-cover in galvanized sheet metal 10 cm high-wood-lined and faestile on the bottom-roof the galvanized sheet metal-.plastic transport template-girandole galvanized-metal door-3 angles from connection-spacers mounted in the nest-mobile antivarroa net bottom with removable galvanized sheet metal bottom from the back-woods made of seasoned fir, thickness 25mm-walls assembled with screws - Handles for transport - Frame rest Painted
€122.00Price
Beehives D.B. 8 FAVI STANDARD with fixed anti-varroa net bottom Nest-cover with mounted 4-position disc-cover in galvanized sheet metal 10 cm high-wood-lined and faestile on the bottom-roof the galvanized sheet metal-.plastic transport template-girandole galvanized-metal door-3 angles from connection-spacers mounted in the nest-mobile antivarroa net bottom with removable galvanized sheet metal bottom from the back-woods made of seasoned fir, thickness 25mm-walls assembled with screws - Handles for transport - Frame rest Painted
€122.00Price
€122.00Price
Beehives Dadant Blatt 8-frame Standard Beehive with fixed anti-varroa mesh bottom. Nest + Honey super + 8 mounted, pierced and threaded nest frames + 7 mounted, pierced and threaded honeycomb frames (without wax sheets) (THE COLOR IN THE PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€122.00Price
Beehives Dadant Blatt 8-frame Standard Beehive with fixed anti-varroa mesh bottom. Nest + Honey super + 8 mounted, pierced and threaded nest frames + 7 mounted, pierced and threaded honeycomb frames (without wax sheets) (THE COLOR IN THE PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
Beehives Dadant Blatt 8-frame Standard Beehive with fixed anti-varroa mesh bottom. Nest + Honey super + 8 mounted, pierced and threaded nest frames + 7 mounted, pierced and threaded honeycomb frames (without wax sheets) (THE COLOR IN THE PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€122.00Price
This special cage allows the queen and escorts to be captured quickly and easily, and also allows the escorts to be released, leaving the queen alone before introdizone. Each cage consists of 3 quick-assembly pieces
€1.10Price
This special cage allows the queen and escorts to be captured quickly and easily, and also allows the escorts to be released, leaving the queen alone before introdizone. Each cage consists of 3 quick-assembly pieces
€1.10Price
€1.10Price
Clear plastic cage for transporting queens. It has a water compartment, allowing the queen and attendants a long survival.
€1.10Price
Clear plastic cage for transporting queens. It has a water compartment, allowing the queen and attendants a long survival.
Clear plastic cage for transporting queens. It has a water compartment, allowing the queen and attendants a long survival.
€1.10Price
€3.80Price
Plant fuel for smokers made only from natural products in 1kg package
Plant fuel for smokers made only from natural products in 1kg package
€3.80Price
Honey super wax sheet size Dadant B. obtained by melting of PURE OPERATING Wax - 50 g per sheet approx.
€85.00Price
Honey super wax sheet size Dadant B. obtained by melting of PURE OPERATING Wax - 50 g per sheet approx.
€85.00Price
- Sale
€85.00Price
Honey super Dadant B. wax sheets obtained by casting PURE OPERATION - 50 g per sheet - Boxed 5 Kg - 100 sheets approx. Size: sheet 41 x 12.7 cm PROVENANCE : ITALY
- Sale
€85.00Price
Honey super Dadant B. wax sheets obtained by casting PURE OPERATION - 50 g per sheet - Boxed 5 Kg - 100 sheets approx. Size: sheet 41 x 12.7 cm PROVENANCE : ITALY
- Sale
Honey super Dadant B. wax sheets obtained by casting PURE OPERATION - 50 g per sheet - Boxed 5 Kg - 100 sheets approx. Size: sheet 41 x 12.7 cm PROVENANCE : ITALY
€85.00Price
€1.35Price
SQUARE-BASED WHITE GLASS BOTTLE with white plastic CAP Capacity: 50 ml
€1.35Price
SQUARE-BASED WHITE GLASS BOTTLE with white plastic CAP Capacity: 50 ml
SQUARE-BASED WHITE GLASS BOTTLE with white plastic CAP Capacity: 50 ml
€1.35Price
€98.00Price
Professional smoker dadant import u.s.a. jumbo - Diameter: 105 mmHeight: 320 mm
€98.00Price
Professional smoker dadant import u.s.a. jumbo - Diameter: 105 mmHeight: 320 mm
Professional smoker dadant import u.s.a. jumbo - Diameter: 105 mmHeight: 320 mm
€98.00Price
- Sale
€910.00Price
Manual radial Extractor "TUCANO" with stainless steel basket for 20 frames DADANT B. steel helical gear transmission in closed aluminum box Ø 630 mm - 40 mm plastic shear valve - Full discharge bottom No. 3 removable painted legs and hinged transparent cover
- Sale
€910.00Price
Manual radial Extractor "TUCANO" with stainless steel basket for 20 frames DADANT B. steel helical gear transmission in closed aluminum box Ø 630 mm - 40 mm plastic shear valve - Full discharge bottom No. 3 removable painted legs and hinged transparent cover
- Sale
Manual radial Extractor "TUCANO" with stainless steel basket for 20 frames DADANT B. steel helical gear transmission in closed aluminum box Ø 630 mm - 40 mm plastic shear valve - Full discharge bottom No. 3 removable painted legs and hinged transparent cover
€910.00Price
€980.00Price
RADIAL Extractor D.B. MOTOR ELOBA 110W/230V variable speed in 2 directions with STAINLESS STEEL basket for 12 Honey super frames (or 3 nest frames with additional cages) - (Basket Cod. QI C101) Ø525 -with CUT-OUT RUBBER in nylon Ø 40 mm For nest frames No. 3 additional stainless steel cages not included (Cod. QI G06) are required.
€980.00Price
RADIAL Extractor D.B. MOTOR ELOBA 110W/230V variable speed in 2 directions with STAINLESS STEEL basket for 12 Honey super frames (or 3 nest frames with additional cages) - (Basket Cod. QI C101) Ø525 -with CUT-OUT RUBBER in nylon Ø 40 mm For nest frames No. 3 additional stainless steel cages not included (Cod. QI G06) are required.
RADIAL Extractor D.B. MOTOR ELOBA 110W/230V variable speed in 2 directions with STAINLESS STEEL basket for 12 Honey super frames (or 3 nest frames with additional cages) - (Basket Cod. QI C101) Ø525 -with CUT-OUT RUBBER in nylon Ø 40 mm For nest frames No. 3 additional stainless steel cages not included (Cod. QI G06) are required.
€980.00Price
€2.00Price
Transparent food grade plastic jar with gold-colored lid Volume 150 mL Diameter: 6.5 cm Height: 5 cm
€2.00Price
Transparent food grade plastic jar with gold-colored lid Volume 150 mL Diameter: 6.5 cm Height: 5 cm
Transparent food grade plastic jar with gold-colored lid Volume 150 mL Diameter: 6.5 cm Height: 5 cm
€2.00Price
€4.80Price
Woven white cotton candle wick in skeins -LENGTH 20 metersWick diameter: 1.5 - 2 - 3 mm in choice
€4.80Price
Woven white cotton candle wick in skeins -LENGTH 20 metersWick diameter: 1.5 - 2 - 3 mm in choice
Woven white cotton candle wick in skeins -LENGTH 20 metersWick diameter: 1.5 - 2 - 3 mm in choice
€4.80Price
€4.60Price
PLATE BOTTOM for plastic movable bottom (item QI F62 for Beehives Dadant)
€4.60Price
PLATE BOTTOM for plastic movable bottom (item QI F62 for Beehives Dadant)
PLATE BOTTOM for plastic movable bottom (item QI F62 for Beehives Dadant)
€4.60Price
€1.00Price
GALVANIZED BEES ESCAPE FIXING SCREWS (8-WAY art. QI A17, 16-WAY art. QI A94, LOSANGA QI A90) TO PLASTIC BEES ESCAPE TABLE (art. QI A95 and art. QI A98) Conf. of 8 SCREWS
€1.00Price
GALVANIZED BEES ESCAPE FIXING SCREWS (8-WAY art. QI A17, 16-WAY art. QI A94, LOSANGA QI A90) TO PLASTIC BEES ESCAPE TABLE (art. QI A95 and art. QI A98) Conf. of 8 SCREWS
GALVANIZED BEES ESCAPE FIXING SCREWS (8-WAY art. QI A17, 16-WAY art. QI A94, LOSANGA QI A90) TO PLASTIC BEES ESCAPE TABLE (art. QI A95 and art. QI A98) Conf. of 8 SCREWS
€1.00Price
€4.50Price
PLASTIC TRAP TRAP COLLECTION CASE (item QI T51L20) and (item QI T51L19)
€4.50Price
PLASTIC TRAP TRAP COLLECTION CASE (item QI T51L20) and (item QI T51L19)
PLASTIC TRAP TRAP COLLECTION CASE (item QI T51L20) and (item QI T51L19)
€4.50Price
Dimensions: Interior 38cm x 46cm h 16cm - Exterior 43cm x 51cm h 16cm
€28.00Price
Dimensions: Interior 38cm x 46cm h 16cm - Exterior 43cm x 51cm h 16cm
€28.00Price
€28.00Price
Half Honey super (height 16cm) made of painted wood for 10-frame Langstroth Beehives with 9-notch spacers mounted and 9 frames of your choice with wire included (no wax sheets). 25mm thick wood. (COLOR IN PHOTO IS RANDOM AND DEPENDS ON AVAILABILITY)
€28.00Price
Half Honey super (height 16cm) made of painted wood for 10-frame Langstroth Beehives with 9-notch spacers mounted and 9 frames of your choice with wire included (no wax sheets). 25mm thick wood. (COLOR IN PHOTO IS RANDOM AND DEPENDS ON AVAILABILITY)
Half Honey super (height 16cm) made of painted wood for 10-frame Langstroth Beehives with 9-notch spacers mounted and 9 frames of your choice with wire included (no wax sheets). 25mm thick wood. (COLOR IN PHOTO IS RANDOM AND DEPENDS ON AVAILABILITY)
€28.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€17.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€17.80Price
€17.80Price
Silicone candle mold with SMALL BEES Mold height: 65 mm - Wick: 3 mm - Weight: 25 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base.They are not suitable for food production.
€17.80Price
Silicone candle mold with SMALL BEES Mold height: 65 mm - Wick: 3 mm - Weight: 25 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base.They are not suitable for food production.
Silicone candle mold with SMALL BEES Mold height: 65 mm - Wick: 3 mm - Weight: 25 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base.They are not suitable for food production.
€17.80Price
€3.20Price
SELF-ADHESIVE LABEL - GUARANTEE SEAL - ITALIAN HONEY - CONF. 10 PIECES For 1 kg and 500 g honey jars Length 14 cm
€3.20Price
SELF-ADHESIVE LABEL - GUARANTEE SEAL - ITALIAN HONEY - CONF. 10 PIECES For 1 kg and 500 g honey jars Length 14 cm
SELF-ADHESIVE LABEL - GUARANTEE SEAL - ITALIAN HONEY - CONF. 10 PIECES For 1 kg and 500 g honey jars Length 14 cm
€3.20Price
€2.50Price
Suitable for direct food contact Size: 135 x 85 X 205 mm H (SEE QUANTITY DISCOUNT)
€2.50Price
Suitable for direct food contact Size: 135 x 85 X 205 mm H (SEE QUANTITY DISCOUNT)
Suitable for direct food contact Size: 135 x 85 X 205 mm H (SEE QUANTITY DISCOUNT)
€2.50Price
Helical gear drive in closed aluminum box, with automatic crank disengagement, brake, center cage pin and bar, for honey extractors with ø 520 mm (e.g., Radialnove or Radial 12).
€215.00Price
Helical gear drive in closed aluminum box, with automatic crank disengagement, brake, center cage pin and bar, for honey extractors with ø 520 mm (e.g., Radialnove or Radial 12).
€215.00Price
€215.00Price
HELICOIDAL GEAR TRANSMISSION in an aluminum closed box, with automatic crank disengagement , brake, central basket shaft (14 mm diameter) and bar FOR EXTRACTOR ALLOY with Diam.: 630 mm (Radial 20)
€215.00Price
HELICOIDAL GEAR TRANSMISSION in an aluminum closed box, with automatic crank disengagement , brake, central basket shaft (14 mm diameter) and bar FOR EXTRACTOR ALLOY with Diam.: 630 mm (Radial 20)
HELICOIDAL GEAR TRANSMISSION in an aluminum closed box, with automatic crank disengagement , brake, central basket shaft (14 mm diameter) and bar FOR EXTRACTOR ALLOY with Diam.: 630 mm (Radial 20)
€215.00Price
[img-3714-left-thickbox_default] [img-3715-left-thickbox_default]
€48.00Price
[img-3714-left-thickbox_default] [img-3715-left-thickbox_default]
€48.00Price
€48.00Price
1liter bottle (allows about 100 traps) Product to be diluted (see dosages below) METHOD OF USE: The product should not be used pure, but diluted as follows: 10 ml liquid attractant 200 ml water 50 g sugar Suitable for HORNET TRAP trap
€48.00Price
1liter bottle (allows about 100 traps) Product to be diluted (see dosages below) METHOD OF USE: The product should not be used pure, but diluted as follows: 10 ml liquid attractant 200 ml water 50 g sugar Suitable for HORNET TRAP trap
1liter bottle (allows about 100 traps) Product to be diluted (see dosages below) METHOD OF USE: The product should not be used pure, but diluted as follows: 10 ml liquid attractant 200 ml water 50 g sugar Suitable for HORNET TRAP trap
€48.00Price
The 3M 6200 reusable semi-mask respirator is easy to use, lightweight and requires minimal maintenance. The respirator is sold with a pair of Class A1 filters suitable for respiratory protection from organic vapors with boiling points above 65°C (e.g., oxalic acid). The nape cap is designed to ensure a snug fit and to facilitate lacing behind the neck. The soft elastomeric facepiece and light weight (82 g) provide excellent comfort even for prolonged periods of work. The compact design minimizes obstruction of the field of view and makes it easy to handle. The two-side filter attachment system offers minimal breathing resistance. Filters (class A1) for organic gases and vapors model 3M 6051 are suitable for paints, solvents, organic fumes (e.g., oxalic acid) and nuisance odors. Suitable for 3M 6000 Series and 7000 Series 3M semi-masks and full-face masks The dual-filter design offers good balance and a panoramic view The filters can be used with all 3M semi-mask and full-face respirators equipped with a bayonet coupling system The bayonet coupling allows the filters to be easily snapped on
€74.00Price
The 3M 6200 reusable semi-mask respirator is easy to use, lightweight and requires minimal maintenance. The respirator is sold with a pair of Class A1 filters suitable for respiratory protection from organic vapors with boiling points above 65°C (e.g., oxalic acid). The nape cap is designed to ensure a snug fit and to facilitate lacing behind the neck. The soft elastomeric facepiece and light weight (82 g) provide excellent comfort even for prolonged periods of work. The compact design minimizes obstruction of the field of view and makes it easy to handle. The two-side filter attachment system offers minimal breathing resistance. Filters (class A1) for organic gases and vapors model 3M 6051 are suitable for paints, solvents, organic fumes (e.g., oxalic acid) and nuisance odors. Suitable for 3M 6000 Series and 7000 Series 3M semi-masks and full-face masks The dual-filter design offers good balance and a panoramic view The filters can be used with all 3M semi-mask and full-face respirators equipped with a bayonet coupling system The bayonet coupling allows the filters to be easily snapped on
€74.00Price
€74.00Price
3M Model 6200 semi-mask respirator (medium size) for protection from organic gases and vapors (e.g., oxalic acid), reusable, made of elastomeric material, equipped with bayonet filter attachment. Pack of 1 pc with 2 filters.For filters see: (Code GS 458382) Features:Two-filter design reduces respiratory resistance Soft, lightweight face piece Economical replaceable filters 3M bayonet filter attachment system Convenient harness and easy buckle closure CE/EN 140 marking
€74.00Price
3M Model 6200 semi-mask respirator (medium size) for protection from organic gases and vapors (e.g., oxalic acid), reusable, made of elastomeric material, equipped with bayonet filter attachment. Pack of 1 pc with 2 filters.For filters see: (Code GS 458382) Features:Two-filter design reduces respiratory resistance Soft, lightweight face piece Economical replaceable filters 3M bayonet filter attachment system Convenient harness and easy buckle closure CE/EN 140 marking
3M Model 6200 semi-mask respirator (medium size) for protection from organic gases and vapors (e.g., oxalic acid), reusable, made of elastomeric material, equipped with bayonet filter attachment. Pack of 1 pc with 2 filters.For filters see: (Code GS 458382) Features:Two-filter design reduces respiratory resistance Soft, lightweight face piece Economical replaceable filters 3M bayonet filter attachment system Convenient harness and easy buckle closure CE/EN 140 marking
€74.00Price
MESH AIR fabric: stands for functionality and comfort. It is a three-dimensional, ladderproof fabric with an abrasion resistance of more than 50,000 MARTINDALE cycles that provides breathability at the highest level.
€92.00Price
MESH AIR fabric: stands for functionality and comfort. It is a three-dimensional, ladderproof fabric with an abrasion resistance of more than 50,000 MARTINDALE cycles that provides breathability at the highest level.
€92.00Price
€92.00Price
SUIT with astronaut mesh MASK made of MESH AIR fabric with 2 layers of breathable mesh fabric that is lightweight and super durable.With front zipper up to the crotch and zipper to detach the mask completely.Elastic stiff cotton cuffs and anklets, thumb support6 large front pockets
€92.00Price
SUIT with astronaut mesh MASK made of MESH AIR fabric with 2 layers of breathable mesh fabric that is lightweight and super durable.With front zipper up to the crotch and zipper to detach the mask completely.Elastic stiff cotton cuffs and anklets, thumb support6 large front pockets
SUIT with astronaut mesh MASK made of MESH AIR fabric with 2 layers of breathable mesh fabric that is lightweight and super durable.With front zipper up to the crotch and zipper to detach the mask completely.Elastic stiff cotton cuffs and anklets, thumb support6 large front pockets
€92.00Price
€19.00Price
"From egg to bee" photo POSTER, made of plasticized cardboard, printed in color, complete with metal stick with hanger. Size: 60 x 90 cm
€19.00Price
"From egg to bee" photo POSTER, made of plasticized cardboard, printed in color, complete with metal stick with hanger. Size: 60 x 90 cm
"From egg to bee" photo POSTER, made of plasticized cardboard, printed in color, complete with metal stick with hanger. Size: 60 x 90 cm
€19.00Price
€7.20Price
DIAPHRAGM made of high-density poihistirene mounted in the nesting frame for D.B. Beehives - Thickness 20 or 30 mmDiaphragm frame sturdier than normal framesPolystyrene diaphragm thickness in OPTION:- 20 mm- 30 mm
€7.20Price
DIAPHRAGM made of high-density poihistirene mounted in the nesting frame for D.B. Beehives - Thickness 20 or 30 mmDiaphragm frame sturdier than normal framesPolystyrene diaphragm thickness in OPTION:- 20 mm- 30 mm
DIAPHRAGM made of high-density poihistirene mounted in the nesting frame for D.B. Beehives - Thickness 20 or 30 mmDiaphragm frame sturdier than normal framesPolystyrene diaphragm thickness in OPTION:- 20 mm- 30 mm
€7.20Price
D.B. Standard 7-frame Beehives made of 25mm-thick wood, complete with Honey super and wire frames, high wire cover with 4-position disc, electro-welded galvanized sheet metal roof, anti-moth net bottom, galvanized sheet metal tray, transport template, handles, corners, metal door. Painted with environmentally friendly water-based paint.
€113.00Price
D.B. Standard 7-frame Beehives made of 25mm-thick wood, complete with Honey super and wire frames, high wire cover with 4-position disc, electro-welded galvanized sheet metal roof, anti-moth net bottom, galvanized sheet metal tray, transport template, handles, corners, metal door. Painted with environmentally friendly water-based paint.
€113.00Price
€113.00Price
Beehives Dadant Blatt Standard 7-frame Beehive made of 25mm thick water-painted wood including honeycomb, 7 nest frames with wire and 6 honeycomb frames with wire. Made of Trentino pine wood - MADE IN ITALY - (THE COLOR IN THE PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€113.00Price
Beehives Dadant Blatt Standard 7-frame Beehive made of 25mm thick water-painted wood including honeycomb, 7 nest frames with wire and 6 honeycomb frames with wire. Made of Trentino pine wood - MADE IN ITALY - (THE COLOR IN THE PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
Beehives Dadant Blatt Standard 7-frame Beehive made of 25mm thick water-painted wood including honeycomb, 7 nest frames with wire and 6 honeycomb frames with wire. Made of Trentino pine wood - MADE IN ITALY - (THE COLOR IN THE PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€113.00Price
€17.00Price
Wood screw - galvanized steel - 3.5 x 9.5 mm - length 9.5 mm - whole thread- round head Cross-cut socket For fixing bottom nets (Conf. box of 1000 pcs.)
€17.00Price
Wood screw - galvanized steel - 3.5 x 9.5 mm - length 9.5 mm - whole thread- round head Cross-cut socket For fixing bottom nets (Conf. box of 1000 pcs.)
Wood screw - galvanized steel - 3.5 x 9.5 mm - length 9.5 mm - whole thread- round head Cross-cut socket For fixing bottom nets (Conf. box of 1000 pcs.)
€17.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€39.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€39.00Price
€39.00Price
Silicone candle mold with small smooth cylinder Mold height: 105 mm - Diameter: 65 mm - Wick: 3 mm - Weight: 285 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€39.00Price
Silicone candle mold with small smooth cylinder Mold height: 105 mm - Diameter: 65 mm - Wick: 3 mm - Weight: 285 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Silicone candle mold with small smooth cylinder Mold height: 105 mm - Diameter: 65 mm - Wick: 3 mm - Weight: 285 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€39.00Price
€22.00Price
Full-diameter NYLON FILTER for 100 Kg ripener - With lanyard for attachment on ripener - DIAMETER 38 cm 300 Micron mesh - To be combined with full-diameter 100 Kg mesh filter (Code QI F22)
€22.00Price
Full-diameter NYLON FILTER for 100 Kg ripener - With lanyard for attachment on ripener - DIAMETER 38 cm 300 Micron mesh - To be combined with full-diameter 100 Kg mesh filter (Code QI F22)
Full-diameter NYLON FILTER for 100 Kg ripener - With lanyard for attachment on ripener - DIAMETER 38 cm 300 Micron mesh - To be combined with full-diameter 100 Kg mesh filter (Code QI F22)
€22.00Price
€17.00Price
APISCAMPO on wooden board 50 x 50 cm for D.B. 12-frame Beehives with ascending valve with LOSANGA Bee escape (Code FO 2130)
€17.00Price
APISCAMPO on wooden board 50 x 50 cm for D.B. 12-frame Beehives with ascending valve with LOSANGA Bee escape (Code FO 2130)
APISCAMPO on wooden board 50 x 50 cm for D.B. 12-frame Beehives with ascending valve with LOSANGA Bee escape (Code FO 2130)
€17.00Price
€4.60Price
2 L plastic feeder - complete with bell and transparent lidDim: 26 x 26 x 5.5 cm
€4.60Price
2 L plastic feeder - complete with bell and transparent lidDim: 26 x 26 x 5.5 cm
2 L plastic feeder - complete with bell and transparent lidDim: 26 x 26 x 5.5 cm
€4.60Price
€175.00Price
OSSALIC ACID SUBLIMATOR Stainless steel frame equipped with measuring cup/dosing device Alim. 12 V (battery) - 125 W
€175.00Price
OSSALIC ACID SUBLIMATOR Stainless steel frame equipped with measuring cup/dosing device Alim. 12 V (battery) - 125 W
OSSALIC ACID SUBLIMATOR Stainless steel frame equipped with measuring cup/dosing device Alim. 12 V (battery) - 125 W
€175.00Price
No. 3 additional cages not included are required for nest combs (LA 4790)
€230.00Price
No. 3 additional cages not included are required for nest combs (LA 4790)
€230.00Price
- Sale
€230.00Price
RADIAL STAINLESS STEEL BASKET for "TUCANO" Extractor for 20 Honey super frames or 3 DADANT nest frames - Extractor diameter 620 mm - pin hole diameter 14 mm Dim: Diameter 57 cm - Height 39 cm
- Sale
€230.00Price
RADIAL STAINLESS STEEL BASKET for "TUCANO" Extractor for 20 Honey super frames or 3 DADANT nest frames - Extractor diameter 620 mm - pin hole diameter 14 mm Dim: Diameter 57 cm - Height 39 cm
- Sale
RADIAL STAINLESS STEEL BASKET for "TUCANO" Extractor for 20 Honey super frames or 3 DADANT nest frames - Extractor diameter 620 mm - pin hole diameter 14 mm Dim: Diameter 57 cm - Height 39 cm
€230.00Price
€1,440.00Price
RADIAL D.B. MOTOR EXTRACTOR with BRAKE with STAINLESS STEEL basket for 20 Honey super frames or 4 nest frames - Ø 640 mm - total height 980 mmFor nest frames need No. 4 additional cages (Code GN 160GND20) NOT INCLUDEDMotor "ELOBA" with variable speed in the 2 directions - 220 V/50 Hz - 110 WNew welded bottom that improves honey discharge with Ø 40 mm nylon CUT TAPE
€1,440.00Price
RADIAL D.B. MOTOR EXTRACTOR with BRAKE with STAINLESS STEEL basket for 20 Honey super frames or 4 nest frames - Ø 640 mm - total height 980 mmFor nest frames need No. 4 additional cages (Code GN 160GND20) NOT INCLUDEDMotor "ELOBA" with variable speed in the 2 directions - 220 V/50 Hz - 110 WNew welded bottom that improves honey discharge with Ø 40 mm nylon CUT TAPE
RADIAL D.B. MOTOR EXTRACTOR with BRAKE with STAINLESS STEEL basket for 20 Honey super frames or 4 nest frames - Ø 640 mm - total height 980 mmFor nest frames need No. 4 additional cages (Code GN 160GND20) NOT INCLUDEDMotor "ELOBA" with variable speed in the 2 directions - 220 V/50 Hz - 110 WNew welded bottom that improves honey discharge with Ø 40 mm nylon CUT TAPE
€1,440.00Price
€4.50Price
PLASTIC "CRISTAL" transparent royal jelly spoon (100 pieces) Length 7 cm
€4.50Price
PLASTIC "CRISTAL" transparent royal jelly spoon (100 pieces) Length 7 cm
PLASTIC "CRISTAL" transparent royal jelly spoon (100 pieces) Length 7 cm
€4.50Price
€215.00Price
Food-grade white plastic PE PROPOLIS NET - Height 50 cm in 25 m ROLL - Thickness 1.3 mmRhomboidal Mesh Design: Each diamond-shaped mesh measures 3.4 x 3.2 mm, designed to effectively hold propolis Collection: Once the net is full, it can be removed and frozen for 12 to 24 hours. After hardening, the propolis can be easily removed by twisting the mesh, leaving no residue.
€215.00Price
Food-grade white plastic PE PROPOLIS NET - Height 50 cm in 25 m ROLL - Thickness 1.3 mmRhomboidal Mesh Design: Each diamond-shaped mesh measures 3.4 x 3.2 mm, designed to effectively hold propolis Collection: Once the net is full, it can be removed and frozen for 12 to 24 hours. After hardening, the propolis can be easily removed by twisting the mesh, leaving no residue.
Food-grade white plastic PE PROPOLIS NET - Height 50 cm in 25 m ROLL - Thickness 1.3 mmRhomboidal Mesh Design: Each diamond-shaped mesh measures 3.4 x 3.2 mm, designed to effectively hold propolis Collection: Once the net is full, it can be removed and frozen for 12 to 24 hours. After hardening, the propolis can be easily removed by twisting the mesh, leaving no residue.
€215.00Price
€20.00Price
YELLOW COTTON PANTS for beekeeper with elastic and zippers at anklesSize available : S-M-L-XL-XXL-XXXL
€20.00Price
YELLOW COTTON PANTS for beekeeper with elastic and zippers at anklesSize available : S-M-L-XL-XXL-XXXL
YELLOW COTTON PANTS for beekeeper with elastic and zippers at anklesSize available : S-M-L-XL-XXL-XXXL
€20.00Price
€20.00Price
ROLLED CONICAL bucket made of white plastic - with LID pressure-tight closure and safety tab - 40 mm NYLON CUT HANDLECapacity : 32 L - Diameter 37.8 cm - Capacity 40 kg of honey
€20.00Price
ROLLED CONICAL bucket made of white plastic - with LID pressure-tight closure and safety tab - 40 mm NYLON CUT HANDLECapacity : 32 L - Diameter 37.8 cm - Capacity 40 kg of honey
ROLLED CONICAL bucket made of white plastic - with LID pressure-tight closure and safety tab - 40 mm NYLON CUT HANDLECapacity : 32 L - Diameter 37.8 cm - Capacity 40 kg of honey
€20.00Price
General CharacteristicsInox volumetric rotary pump with flexible impeller, self-priming ( up to 6 mt.), reversible, low-speed, available in one-piece (coaxial) version, with 1- and 2-speed pulley reduction, with mechanical speed variator, with built-in inverter.The trolley/base, fittings and pump body are made of AISI 304 stainless steel.The "standard" impeller is made of non-toxic natural rubber, or on request in neoprene,nitrile, EPDM, silicone. The standard mechanical seal is ceramic-graphite-NBR, upon request vidia-vidia-NBR or vidia-vidia-viton. Food industry: transfer of delicate liquids, including those with suspended bodies, and of different viscosities without emulsifying : wine, must, must and destemmed grapes, beer, fruit juice and pulp, honey, jam, liquid sugar, glucose, milk, butter, yoghurt, eggs, oil, tomato sauce.
€1,880.00Price
General CharacteristicsInox volumetric rotary pump with flexible impeller, self-priming ( up to 6 mt.), reversible, low-speed, available in one-piece (coaxial) version, with 1- and 2-speed pulley reduction, with mechanical speed variator, with built-in inverter.The trolley/base, fittings and pump body are made of AISI 304 stainless steel.The "standard" impeller is made of non-toxic natural rubber, or on request in neoprene,nitrile, EPDM, silicone. The standard mechanical seal is ceramic-graphite-NBR, upon request vidia-vidia-NBR or vidia-vidia-viton. Food industry: transfer of delicate liquids, including those with suspended bodies, and of different viscosities without emulsifying : wine, must, must and destemmed grapes, beer, fruit juice and pulp, honey, jam, liquid sugar, glucose, milk, butter, yoghurt, eggs, oil, tomato sauce.
€1,880.00Price
€1,880.00Price
Low RPM ROTARY VOLUMETRIC PUMP FOR HONEY AUTOADESCENT stainless steel pump with FLEXIBLE rubber impeller with pulley reduction on a wheeled trolley. This model, with very low RPM (300rpm), and with the NR natural rubber impeller, is particularly suitable for HONEY. Three-phase 400V/50Hz power supply - 1.5 KW - 300 rpm. - Weight 38 Kg Connection 40 mm - 1"1/2 Max. head: H= 16 mt Max. flow rate: 40 L/min.
€1,880.00Price
Low RPM ROTARY VOLUMETRIC PUMP FOR HONEY AUTOADESCENT stainless steel pump with FLEXIBLE rubber impeller with pulley reduction on a wheeled trolley. This model, with very low RPM (300rpm), and with the NR natural rubber impeller, is particularly suitable for HONEY. Three-phase 400V/50Hz power supply - 1.5 KW - 300 rpm. - Weight 38 Kg Connection 40 mm - 1"1/2 Max. head: H= 16 mt Max. flow rate: 40 L/min.
Low RPM ROTARY VOLUMETRIC PUMP FOR HONEY AUTOADESCENT stainless steel pump with FLEXIBLE rubber impeller with pulley reduction on a wheeled trolley. This model, with very low RPM (300rpm), and with the NR natural rubber impeller, is particularly suitable for HONEY. Three-phase 400V/50Hz power supply - 1.5 KW - 300 rpm. - Weight 38 Kg Connection 40 mm - 1"1/2 Max. head: H= 16 mt Max. flow rate: 40 L/min.
€1,880.00Price
€2.10Price
SILICONE ORING FOR SUBLIMOX APF-Plus PROCESS CAP (SPARE)
€2.10Price
SILICONE ORING FOR SUBLIMOX APF-Plus PROCESS CAP (SPARE)
SILICONE ORING FOR SUBLIMOX APF-Plus PROCESS CAP (SPARE)
€2.10Price
€10.90Price
POCKET NURSE in MASONITE and PARAFFINED WOOD from D.B. Beehive nest - DIM: 43.5 cm x 30 cm
€10.90Price
POCKET NURSE in MASONITE and PARAFFINED WOOD from D.B. Beehive nest - DIM: 43.5 cm x 30 cm
POCKET NURSE in MASONITE and PARAFFINED WOOD from D.B. Beehive nest - DIM: 43.5 cm x 30 cm
€10.90Price
€0.51Price
212 ml Regina glass jar for HONEY 250 g - Mouth/closure T63 (63 mm) h= 85 mm - Diam = 66 mm - weight = 145 g IN TERMOPACK of 24 pieces (The quantity ordered refers to individual jars, not thermopacks)
€0.51Price
212 ml Regina glass jar for HONEY 250 g - Mouth/closure T63 (63 mm) h= 85 mm - Diam = 66 mm - weight = 145 g IN TERMOPACK of 24 pieces (The quantity ordered refers to individual jars, not thermopacks)
212 ml Regina glass jar for HONEY 250 g - Mouth/closure T63 (63 mm) h= 85 mm - Diam = 66 mm - weight = 145 g IN TERMOPACK of 24 pieces (The quantity ordered refers to individual jars, not thermopacks)
€0.51Price
€28.00Price
WOODEN POLL COLLECTION TRAPPER with removable drawer to attach in front of the Beehive sill For standard Dadant Beehives with 10-frame porch
€28.00Price
WOODEN POLL COLLECTION TRAPPER with removable drawer to attach in front of the Beehive sill For standard Dadant Beehives with 10-frame porch
WOODEN POLL COLLECTION TRAPPER with removable drawer to attach in front of the Beehive sill For standard Dadant Beehives with 10-frame porch
€28.00Price
€2.20Price
Kit composed for Beehive dadant B. 10 F cube by: 3 corner pieces2 nesting spacers 10 notches1 notched/perforated door (length 355 mm) with guides OPTIONAL hardware:2 spring hooks1 corner Frame rest (Handles not included)
€2.20Price
Kit composed for Beehive dadant B. 10 F cube by: 3 corner pieces2 nesting spacers 10 notches1 notched/perforated door (length 355 mm) with guides OPTIONAL hardware:2 spring hooks1 corner Frame rest (Handles not included)
Kit composed for Beehive dadant B. 10 F cube by: 3 corner pieces2 nesting spacers 10 notches1 notched/perforated door (length 355 mm) with guides OPTIONAL hardware:2 spring hooks1 corner Frame rest (Handles not included)
€2.20Price
Beehives D.B. 10 frames standard painted with fixed anti-varroa net bottom complete with: Nest; Honey super; 10 nest frames with wax foil; 9 honeycomb frames with wax goflio cover with 4-position disc mounted; 10-cm-high galvanized sheet metal lid lined with wood and faestile on the bottom; canopy the galvanized sheet metal; plastic transport mask; galvanized pinwheels; small metal door; 3 connection angles; spacers mounted in nest and Honey super; fixed anti-moth net bottom with galvanized sheet metal bottom removable from the back; seasoned fir wood, 25mm thick; walls assembled with screws; carrying handles; Frame rest
€161.00Price
Beehives D.B. 10 frames standard painted with fixed anti-varroa net bottom complete with: Nest; Honey super; 10 nest frames with wax foil; 9 honeycomb frames with wax goflio cover with 4-position disc mounted; 10-cm-high galvanized sheet metal lid lined with wood and faestile on the bottom; canopy the galvanized sheet metal; plastic transport mask; galvanized pinwheels; small metal door; 3 connection angles; spacers mounted in nest and Honey super; fixed anti-moth net bottom with galvanized sheet metal bottom removable from the back; seasoned fir wood, 25mm thick; walls assembled with screws; carrying handles; Frame rest
€161.00Price
€161.00Price
Beehives Dadant Blatt Standard 10-frame Beehive with movable anti-varroa net bottom complete with honeycomb, 10 nest frames and 9 honeycomb frames with mounted wax sheets Water-painted (COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€161.00Price
Beehives Dadant Blatt Standard 10-frame Beehive with movable anti-varroa net bottom complete with honeycomb, 10 nest frames and 9 honeycomb frames with mounted wax sheets Water-painted (COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
Beehives Dadant Blatt Standard 10-frame Beehive with movable anti-varroa net bottom complete with honeycomb, 10 nest frames and 9 honeycomb frames with mounted wax sheets Water-painted (COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€161.00Price